LIGHTING RELAY GUIDE
CONTROL PROTECT POWER
Whether you are designing your lighting or outlet controller
for 120v, 277, 347, or 480v, TE Connectivity (TE) has extensive
capabilities in the design and manufacture of relays for the task.
Meeting the inrush current requirements of National Electrical
Manufacturers Association (NEMA) 410 and complying with
standardized PCB footprints, TE lighting relays portfolio covers 1A,
single fixture control all the way up to 20A branch circuit ratings.
Through agency approved test labs, we ensure that our relays
are tested to meet the expectations of the lighting industry.
Outdoor
Wall Switch / Dimmer Occupancy Sensor Power Pack
Controller
Electronic Ballast / LED Driver
Controlled Outlet
INDUSTRIAL /// LIGHTING RELAY GUIDELighting Relay Guide
SCHRACK RT SCHRACK RT INRUSH SCHRACK RTX
DC and AC coil For inrush peak currents up to 80A Inrush peak currents up to 370A
Key Features
Mono-or bistable coil Mono-or bistable coil Bistable coil
Reinforced insulation Reinforced insulation Reinforced insulation
WG type available (IEC 60335-1) WG type available (IEC 60335-1) 16A rated uorescent load acc.
EN60669-1
High ambient temperature version
(105C) 8A electronic ballast acc. UL508
THR (reow) version 1 1/2 HP motor load acc. UL508
Sensitive version
Bifurcated contacts
Footprint
2) see footnote below
S0418-CM
HVAC, Home automation, Lighting applications, Movement Lighting control systems
Applications
detectors, Motors control,
Machine control, Energy control Motion sensors
Domestic appliances
Switching cabinet, Interface modules Home automation applications
Contact Data
Contact arrangement 1. form C (CO), 1 form A (NO) 1 form C (CO) 1 form A (NO)
2 form C (CO), 2 form A (NO) 1 form A (NO)
250VAC
Rated voltage
250VAC 250VAC
16A
Rated current
2X8/16A 16A
4000VA
Switching power / Max. break
2X2000/4000VA 4000VA
W (pre-make contact) + AgSnO
2
Contact material
AgNi90/10, AgSnO AgNi90/10, AgSnO
2 2
Min. recommended
1) see footnote below 1) see footnote below
1) see footnote below
contact load
Coil Data
Magnetic system DC, AC, bistable DC, bistable Bistable
Rated coil voltage 5 to 110VDC/24 to 230VAC 5 to 11VDC 5 to 48VDC
Rated coil power 400mW/0.75VA 400mW 650mW/665mW
Dielectric Strength
Initial dielectric strength
between open contacts 1000Vrms 1000Vrms 1250Vrms
between contact and coil 5000Vrms 5000Vrms 5000Vrms
between adjacent contacts 2500Vrms
Clearance/creepage
between contact and coil >10/10mm >10/10mm min. 6/6mm
Other Data
Ambient temperature (max.) +75C (AC type) +85C +70C
+85C
RTII, RTIII
Category of environmental RTII RTII
protection IEC61810
Terminal type THT, THR (DC and AC type)
THT THT
Mounting PCB or on socket
PCB or socket PCB
Dimensions (lwh) 29x12.7x15.7mm
29x12.7x15.7mm 29.1x12.7x16mm
PCB and DIN rail sockets
Accessories
Link to datasheet SCHRACK RT SCHRACK RT INRUSH SCHRACK RTX
1) R ecommended minimum load indication for contact material: AU and gold plated: 1mA at 6VDC; AgNi0.15 and AgNi90/10: 2) F ootprint images are representative. For a complete selection, refer to the TE
10mA at 12VDC: AgCdO and AgSnO : 100mA at 12VDC. Please contact technical support for detailed technical data. data sheet via the link above.
2
INDUSTRIAL /// LIGHTING RELAY GUIDE