PROTO-5806-02-BRD TE Connectivity

Sample board for USB DEVELOPPER KIT Sample boards supporting several pressure modules including: - MS45xx family (on request only) - MS5536 - MS5540 / 5541 - MS5561 - MS5607 / 5611 - MS5637 - MS5803 - MS5805 - MS5806 2 connectors on board: - USB Demo kit interface connector - 16 pins header user interface connector DESCRIPTION The MS5xxx-BRD is a sample board family which may be plugged into the MEAS USB DEVEL KEY tool. It currently supports all our sensors family like the MS45xx, MS55xx, MS56xx and MS58xx. Communication protocols 3wires/SPI and I2c are available on dedicated sample boards. All Samples Boards have a USBDEVEL KEY connector and also a standard 2x8 pins connector for user applications. GENERAL BOARD DESCRIPTION Edge connector User connector (USB DEVEL KEY) 2.54mm 2x8 pins Figure 1 Top side view on Sample Board MEAS sensor module External Capacitor and I2C Resistors Figure 2 Bottom side view on Sample Board DA5xxx-BRD 000 www.meas-spec.com August 8, 2013 0USBDK1867 ECN1444 1/7 Sample board for USB DEVELOPPER KIT GENERAL BOARD SCHEMATIC DESCRIPTION The PCB for SAMPLES BOARDS is done to be connected to the USB DEVEL KEY and also to a Header of 2x8 pin for customer use. We have SAMPLES BOARDS for all our products with dedicated communication bus. SCHEMATIC FOR I2C BUS: GND PEN CS CSB MS5xxx VDD PS C VDD SDA PS R R GND SDO SDA SDA SCL SCL SDO PS* CSB* VDD SCL *not on all devices GND Edge connector Header 16 SCHEMATIC FOR SPI BUS: GND PEN CS CSB MS5xxx VDD PS VDD C PS SDI GND SDI SDO SDI SDO SCLK SDO SCLK PS VDD SCLK CSB GND Edge connector Header 16 DA5xxx-BRD 000 www.meas-spec.com August 8, 2013 0USBDK1867 ECN1444 2/7