R85049/82-08W03 TE Connectivity

THIS DRAWING IS A CONTROLLED DOCUMENT. REVISIONS SELF-LOCKING SHIELD BAND TERMINATION SHRINK BOOT ACCOMMODATION ADAPTOR 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR, AND DESIGNED TO MEET REQUIREMENTS OF AS85049/82. 2. ALL COMPONENTS SHALL BE PACKAGED AND SUPPLIED IN A PLASTIC BAG AND LABELED WITH M85049/82 DESIGNATION. e.g. M85049/82-14W02. 3. THIS ADAPTOR MATES TO CONNECTOR SAE-AS50151 CRIMP, MIL-DTL-26482 SERIES 2, SAE-AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III. 4. PART SUPPLIED WITH STANDARD DETENTED SELF-LOCKING WHICH PROVIDES A POSITIVE AUDIBLE DETENTED COUPLING. 5. CATEGORY 3B - MEDIUM DUTY - NON-ENVIRONMENTAL 6. FOR MATERIALS AND PLATING FINISHES INFORMATION REFER TO R85049. FOR ALTERNATIVE MATERIALS AND PLATING FINISHES CONTACT TE CONNECTIVITY. DIMENSIONS: MATERIAL: SEE P/N BREAKDOWN FINISH: SEE P/N BREAKDOWN DWN:N.HAWKINS 30/05/2019 INCHES CHK: R.STYLES 14/06/2019 TE Connectivity TOLERANCES UNLESS OTHERWISE SPECIFIED: PART NUMBER: APVD: M.PAUL 27/06/2019 R85049/82 SERIES PRODUCT SPEC: GENERAL TOL NAME: LINEAR .01 Connector Accessories, Electrical, Backshell, ANGULAR 1 - Straight, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B APPLICATION SPEC: SIZE CAGE CODE DRAWING NO RESTRICTED TO - 06090 P45750 WEIGHT: A4 SCALE SHEET REV OF CUSTOMER DRAWING CA 1.5:1 1 2 1469-35 (3/13) RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. ALL RIGHTS RESERVED. COPYRIGHT 20 BY C 06090-M85049/82-14W02 YYWWTHIS DRAWING IS A CONTROLLED DOCUMENT. REVISIONS 1.66 (42,16) REF 1.35 (34,3) MAX .730 MAX (18,54) .140 (3,50) .130 (3,30) A DIAMOND KNURL .406 (10,30) MARKING LOCATION .344 (8,70) STRAIGHT KNURL TABLE 1 B DIA .010 C DIA FOR CONNECTOR SHELL SIZE (REF) A ENTRY SIZE REF ACCESSORY THREAD MAX SHELL SIZE AS81703 MIL-DTL-26482 AS50151 MIL-DTL-83723 DIA 02 03 02 03 SERIES 3 SERIES 2 CRIMP SERIES III 08 --- 8 8S 8 1/2-20 UNEF .885 (22,48) N/A .250 (6,35) N/A .395 (10,03) 10 --- 10 10S, 10SL 10 5/8-24 UNEF 1.010 (25,65) N/A .312 (7,92) N/A .457 (11,61) 12 7 12 12S AND 12 12 3/4-20 UNEF 1.135 (28,83) .312 (7,92) .438 (11,13) .457 (11,61) .583 (14,81) 14 12 14 14S AND 14 14 7/8-20 UNEF 1.260 (32.00) .438 (11,13) .562 (14,27) .583 (14,81) .707 (17,96) 16 19 16 16S AND 16 16 1-20 UNEF 1.385 (35,18) .500 (12,70) .625 (15,88) .645 (16,38) .770 (19,56) 18 27 18 18 18 1 1/16-18 UNEF 1.510 (38,35) .625 (15,88) .750 (19,05) .770 (19,56) .895 (22,73) 20 37 20 20 20 1 3/16-18 UNEF 1.635 (41,53) .625 (15,88) .812 (20,62) .770 (19,56) .957 (24,31) 22 --- 22 22 22 1 5/16-18 UNEF 1.760 (44,70) .688 (17,48) .938 (23,83) .829 (21,06) 1.083 (27,51) 24 --- 24 24 24 1 7/16-18 UNEF 1.885 (47,88) .750 (19,05) 1.000 (25,40) .895 (22,73) 1.145 (29,08) 28 --- --- 28 --- 1 3/4-18 UNS 2.135 (54,23) .875 (22,23) 1.125 (28,58) 1.020 (25,91) 1.270 (32,26) 61 61 --- --- --- 1 1/2-18 UNEF 1.95 (49,53) .750 (19,05) 1.000 (25,40) .895 (26,30) 1.145 (29,08) METRIC EQUIVALENTS ARE IN PARENTHESIS AND ARE GIVEN FOR GENERAL INFORMATION ONLY TABLE 2 CODE FINISH NOTES FOR SELECTIVE PLATING: - N ELECTROLESS NICKEL (96HRS SALT SPRAY RESISTANCE) 1. CADMIUM/NICKEL INTERFACE SHALL BE COATED WITH POLYSULFIDE CADMIUM OLIVE DRAB OVER ELECTROLESS NICKEL (1000HRS SALT SPRAY W SEALANT. RESISTANCE) 2. AREA FREE OF CADMIUM. ZINC NICKEL BLACK PASSIVATE OVER ELECTROLESS NICKEL (1000HRS SALT Z SPRAY RESISTANCE) P CADMIUM OLIVE DRAB OVER ELECTROLESS NICKEL (SELECTIVE PLATING) SELECTIVE PLATING R85049/82-14W02 SEE NOTE 1 BASIC PART NUMBER SPECIFICATION SHEET CONFIGURATION - (DASH) FOR SELF-LOCKING SEE .06 MIN .06 MIN CONNECTOR SHELL SIZE (TABLE 1) NOTE 2 FINISH (TABLE 2) (1,52) (1,52) ENTRY SIZE (TABLE 1) DIMENSIONS: MATERIAL: SEE P/N BREAKDOWN FINISH: SEE P/N BREAKDOWN DWN:N.HAWKINS 30/05/2019 INCHES CHK: R.STYLES 14/06/2019 TE Connectivity TOLERANCES UNLESS OTHERWISE SPECIFIED: PART NUMBER: APVD: M.PAUL 27/06/2019 R85049/82 SERIES PRODUCT SPEC: GENERAL TOL NAME: LINEAR .01 Connector Accessories, Electrical, Backshell, ANGULAR 1 - Straight, Self-Locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B APPLICATION SPEC: SIZE CAGE CODE DRAWING NO RESTRICTED TO - 06090 P45750 WEIGHT: A4 SCALE SHEET REV OF CUSTOMER DRAWING CA 1.5:1 2 2 1469-35 (3/13) RELEASED FOR PUBLICATION THIS DRAWING IS UNPUBLISHED. ALL RIGHTS RESERVED. COPYRIGHT 20 BY C A THREAD XXXX B C .044 (1.12) MIN