TECHNICAL DATA SHEET Document number: TTDS-032 RayMark Six Labels Issue: 2 Date: August 2014 MATERIAL DESCRIPTION: Computer-printable zero halogen label material. Permanent pressure sensitive acrylic adhesive. Thermally stabilised white polyester film with special ink receptive latent cure epoxy coating on the label surface. After printing, the surface is heat cured, embedding the image within a tough polymeric layer. USE: RayMark Six labels have outstanding abrasion and fluid resistance without the need for an overlay. Ideal for applications where high performance variable data labels are needed, for example in defence, marine, rail and aerospace applications. Can be used as a wire/cable wraparound marker for substrates not less than 6mm (0.25 inches) diameter. Not recommended for outdoor use. PRINTING SYSTEM Print Quality and Print Performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 Identification Printer Product Ribbon Matrix This document can be found at the TE document centre: TECHNICAL DATA SHEET Document number: TTDS-032 RayMark Six Labels Issue: 2 Date: August 2014 Property Test Method Required Fungus Resistance BS EN 60068-2-10:2005 Rating 1 (max) Print Legibility TE108-121012 Legible, print contrast >3 Light fastness, xenon arc 250 hour, ASTM G155-05a Print Legibility TE108-121012 Legible, print contrast >3 Adhesion to aluminium plate TE 108-121030 20N/25mm adhesion Continuous humidity 168h, 40C (104F)/95% RH Legible, print contrast >3 Print Legibility TE108-121012 15N/25mm adhesion Adhesion to aluminium plate TE 108-121030 Thermal ageing 168h at 150C (302F) Legible, 30N/25mm adhesion Print Legibility TE108-121012 Adhesion to aluminium plate TE 108-121030 Thermal cycling 4 hours at -55C (-67F) Legible, 25N/25mm adhesion 4 hours at 25C (77F) 4 hours at 150C (302F) 4 hours at 25C (77F) Print Legibility TE108-121012 Adhesion to aluminium plate TE 108-121030 Dry abrasion resistance TE 109-121020 Legible, print contrast >3 500 cycles, 500g, CS10 wheel 180 Adhesion to: Stainless steel 15 N/25mm Aluminium 20 N/25mm Acrylic painted surface 20 N/25mm TE 109-121030 ABS 20 N/25mm Nylon 15 N/25mm PVC 15 N/25mm If the document is printed it becomes uncontrolled Author: L Smith Check with TE Connectivity (TE) for latest version Issue date: Aug 2014 Page: 2 of 3 While TE Connectivity Ltd. has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.