RNF-3000-18/6-0-25MM TE Connectivity

RW 2053 Revision 2 Page 1 of 7 Date Printed 2/27/2014 RW 2053 Revision 2 RNF-3000 SLEEVING SCOPE This Quality Assurance Specification establishes the quality standard for two types of heat- shrinkable, electrically-insulating, semi-flexible, flame-retarded polyolefin sleeving. Type 1: Flame retarded and coloured Type 2: Clear Approved Signatories* This document is electronically reviewed and approved and so no signatures will appear. If this document is printed it becomes uncontrolled. Check latest revision in DMTEC /Intranet on the nearest PC RW 2053 Revision 2 Page 2 of 7 Date Printed 2/27/2014 1. REVISION HISTORY Revision Change Request Date Incorporated By Number 0 Formerly RK 6150 Revision 3 1 CRF T1020 28 August 1997 C. Woosnam CR98-DM-0027 16 February 1998 L. Abrams 2 Via DMTEC 27 February 2014 C. Diss 2. REQUIREMENTS 2.1 Composition, Appearance and Colour The sleeving shall be homogeneous and free from pinholes, bubbles, cracks and inclusions. The colour shall be as specified in the contract or order. 2.2 Dimensions Size Inside Diameter as Inside Diameter after Wall Thickness after supplied (min) recovery (max) recovery mm mm mm 1.5/0.5 1.5 0.5 0.45 0.10 3/1 3.0 1.0 0.55 0.10 6/2 6.0 2.0 0.65 0.10 9/3 9.0 3.0 0.75 0.12 12/4 12.0 4.0 0.75 0.12 18/6 18.0 6.0 0.85 0.12 24/8 24.0 8.0 1.00 0.18 39/13 39.0 13.0 1.15 0.20 Sleeving of special expanded or recovered dimensions may be supplied as specified in the contract or order. 2.3 Test Requirements The test requirements shall be as specified in Table 1. 3. TEST METHODS 3.1 Unless otherwise specified, tests shall be carried out on specimens of sleeving recovered by conditioning in a fan assisted air circulating oven at 200 5C for 4 1 minutes and allowed to cool in air to ambient temperature. No pre-conditioning period is required prior to testing. Unless otherwise specified, all tests shall be made under standard ambient conditions according to IEC Publication 212. In cases of dispute the tests shall be carried out at a temperature of 23 2C and at 50 5% relative humidity. If this document is printed it becomes uncontrolled. Check latest revision in DMTEC /Intranet on the nearest PC