RP818012 TE Connectivity

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RPII/1 n 1 pole 8/12/16A, 1 form C (CO) or 1 form A (NO) contact n 4kV/8mm coil-contact n Pinning 3.5 or 5mm (8/12A) and 5mm (16A) n RoHS compliant (Directive 2011/65/EC) Typical applications Power supplies, domestic appliances, heating control, installation F0146-B Z Approvals Mechanical endurance 6 VDE Cert. No. 40025448 DC-coil version: >20x10 operations 6 UL E214025 (only for AgNi versions) REM/bistable version: >1x10 operations Technical data of approved types on request Contact Data 8A 12A 16A Coil Data Contact arrangement 1 form C (CO) or 1 form A (NO) Coil voltage range 5 to 110VDC Rated voltage 250VAC Operative range, IEC 61810 2 Max. switching voltage 400VAC Rated current 8A 12A 16A Coil versions, DC coil Limiting making current, Coil Rated Operate Release Coil Rated coil max. 4s, df 10% 16A 20A 25A code voltage voltage voltage resistance power Breaking capacity max. 2000VA 3000VA 4000VA VDC VDC VDC 10% mW Contact material AgNi0.15 AgNi 90/10 AgNi 90/10 005 5 3.5 0.5 54 500 AgSnO 006 6 4.2 0.6 68 500 2 -1 Frequency of operation, with/without load 600/36000h 012 12 8.4 1.2 270 500 1) Operate/release time typ. 8/2ms 024 24 16.8 2.4 1100 500 1) Bounce time typ., form A/form B 2/4ms 048 48 33.6 4.8 4400 500 1) 060 60 42.0 6.0 6540 500 1) Contact ratings 110 110 77.0 11.0 23100 500 Type Contact Load Cycles 1) Coil resistance 15%. All figures are given for coil without pre-energization, at ambient temperature +20C. IEC61810 3 Other coil voltages on request. RP314/RP714 A (NO) 16A, 250 VAC, resistive, 35C 100x10 3 RP314 DC-coil A (NO) 6A, 250 VAC, cos = 0,4, 35C 250x10 3 RP31L DC-coil C (CO) 16A, 250 VAC, resistive, 35C 10x10 3 RP414 DC-coil A (NO) 12A, 250 VAC, resistive, 70C 100x10 3 RP414 REM A (NO) 12A, 250 VAC, resistive, 35C 100x10 3 RP41N/RP814 C (CO) 12A, 250 VAC, resistive, 35C 10x10 3 RP411/RP412 A (NO) 8A, 250 VAC, resistive, 35C 100x10 3 RP411/RP412 C (CO) 8A, 250 VAC, resistive, 35C 10x10 UL508 RP411/RP412 C(CO) 8A, 250VAC, general purpose, 40C 6x10 RP314/RP714 C(CO) 16A, 250VAC, general purpose, 40C 6x10 RP314/RP714 C(CO) 250VAC, 1.5HP, 40C 6x10 RP*14/RP*1N C(CO) 12A, 250VAC, general purpose, 70C 6x10 RP**4/RP**N A(NO) 10A, 250VAC, resistive, 70C 100x10 Coil versions, REM I (1 coil bistable/remanence) Coil Rated Resistance Magnetisation range Demagnetisation range code voltage 15% MIN./ Vdc MAX./Vdc MIN./ Vdc MAX./Vdc VDC A12 12 115 9 18 3 4.8 A24 24 460 18 36 6 9.6 A48 48 1748 36 72 12 19.2 1 04-2020, Rev. 0420 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Power PCB Relay RPII/1 (Continued) Dimensions Coil versions, REM II (2 coil bistable/remanence) Dimensions in mm Coil Rated Resistance Magnetisation range Demagnetisation range code voltage 15% MIN./ Vdc MAX./Vdc MIN./ Vdc MAX./Vdc VDC F05 5 20 3.7 7.5 3.7 6 F12 12 105 9 18 9 14.4 F24 24 460 18 36 18 28.8 All figures are given for coil without pre-energization, at ambient temperature +20C. Other coil voltages on request. Insulation Data Initial dielectric strength between open contacts 1000V rms between contact and coil 4000V S0273-AA rms Clearance/creepage Monostable and REM I (REM II version has 3 coil terminals) between contact and coil 8/8mm Material group of insulation parts IIIa Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Bottom view on solder pins Dimensions in mm PCB layout / terminal assignment 8 / 12 A, pinning 3.5 mm 8 / 12 A, pinning 5 mm 16A, pinning 5 mm S0163-CQ S0163-CP S0163-CO 1 form C (1 CO) 1 form C (1 CO) 1 form C (1 CO) S0163-BG S0163-BC S0163-BE 1 form A (1 NO) 1 form A (1 NO) 1 form A (1 NO) S0163-BH S0163-BD S0163-BF Product code structure Typical product code RP 3 1 4 024 Type RP Power PCB Relay RPII/1 Version 3 16A, flux proof 7 16A, wash tight 4 8/12A, flux proof 8 8/12A, wash tight Contact arrangement 1 1 form C contact (1 CO) 3 1 form A contact (1 NO) 5 1 form B contact (1 NC) Contact material and pinning 2) 1 AgNi0.15, 8A, pinning 5mm 0 Discontinued: AgCdO, pinning 5mm 4 AgNi 90/10, pinning 5mm 2) 2 AgNi0.15, 8A, pinning 3.5mm 8 Discontinued: AgCdO, 8/12A, pinning 3.5mm N AgNi 90/10, 12A, pinning 3,5mm L AgSnO , pinning 5mm 2 Coil Coil code: please refer to coil versions table 2) AgCdO contacts are discontinued and replaced with AgNi contacts (see PCN E-18-003947) 2 04-2020, Rev. 0420 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company