General Purpose Relays SCHRACK
Power PCB Relay RT1 Inrush
1 pole 16 A, 1 CO or 1 NO contact
For inrush peak currents up to 80 A
Sensitive coil 400 mW
5 kV / 10 mm coil-contact
Reinforced insulation
Ambient temperature 85C
RoHS compliant (Directive 2002/95/EC)
as per product date code 0413
Applications
F0177-B
Domestic appliances, heating control, lighting control
Approvals
V REG.-Nr. 6106, Z E214025, b 14385
Technical data of approved types on request
Contact data
Contact configuration 1 CO or 1 NO
Contact set single contact
Type of interruption micro disconnection
Rated current 16 A
Rated voltage / max.switching voltage AC 250/400 VAC
Limiting continuous current UL: 20 A
Maximum breaking capacity AC 4000 VA
Limiting making capacity, max 4 s, duty factor 10% 30 A
max 20 ms (incandescent lamps) 80 A
Contact material AgNi 90/10, AgSnO2
6
Mechanical endurance > 30 x 10 cycles
-1
Rated frequency of operation with / without load 6 / 1200 min
Contact ratings
Type Load Cycles
4
RT31K 1000 W incandescent lamp, 250 VAC, NO contact 9x10
4
RT31L 1000 W incandescent lamp, 250 VAC, NO contact 8x10
4
RT31K 16 A, 240 VAC, NO contact, 85C, VDE/UL508 3x10
4
RT31L 16 A, 240 VAC, NO contact, 85C, VDE/UL508 5x10
5
RT31L 21/3.5 A, 230 VAC, compressor, cos=0.5, NO contact 2,3x10
Coil data, DC-coil
Rated coil voltage range 5...110 VDC
Coil power typ 400 mW
Operative range 2
Coil insulation system according UL1446 class F
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC c mW
++
012 12 8.4 1.2 360 10% 400
++
024 24 16.8 2.4 1440 10% 400
048 48 33.6 4.8 5520+10% 417
060 60 42.0 6.0 8570+12% 420
All figures are given for coil without preenergization, at ambient temperature +23C
Other coil voltages on request
1
Datasheet Rev. HG1 Dimensions are in mm unless Product specification processing information Schrack section.
Issued 2008/07 otherwise specified and are according to IEC 61810-1. only to be used together
www.tycoelectronics.com shown for reference purposes Product data, technical para- with the 'Definitions' at Specifications subject to
www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.General Purpose Relays SCHRACK
Power PCB Relay RT1 Inrush (Continued)
Coil data, bistable coils 1 coil 2 coils
Rated coil voltage range 5...24 VDC
Coil power typ 400 mW typ 600 mW
Operative range 2
Limiting voltage, % of rated coil voltage 120% 150%
Minimum energization duration 30 ms
Maximum energization duration 1 min at < 10% DF
Coil insulation system according UL1446 class F
Coil versions, bistable coil
Coil Rated Operate Reset Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC c mW
bistable, 1 coil
A05 5 3.5 2.8 62+10% 403
A06 6 4.2 3.3 90+10% 400
++
A12 12 8.4 6.6 360 10% 400
++
A24 24 16.8 13.2 1440 10% 400
bistable, 2 coils
F05 5 3.5 2.8 42+10% 595
F06 6 4.2 3.3 55+10% 655
++
F12 12 8.4 6.6 240 10% 600
++
F24 24 16.8 13.2 886 10% 650
All figures are given for coil without preenergization, at ambient temperature +23C
Other coil voltages on request
Coils - operation
Version 1 coil 2 coils
Coil terminals A1 A2 A1 A3 A2
Pull-in + - + -
Reset - + - +
Contact position not defined at delivery
Insulation
Dielectric strength coil-contact circuit 5000 Vrms
open contact circuit 1000 Vrms
Clearance / creepage coil-contact circuit W 10 / 10 mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250 V
Insulation to IEC 60664-1
Type of insulation coil-contact circuit reinforced
open contact circuit micro disconnection
Rated insulation voltage 250 V
Pollution degree 3 2
Rated voltage system 250 V 400 V
Overvoltage category III
Other data
RoHS - Directive 2002/95/EC compliant as per product date code 0413
Ambient temperature range DC coil -40...+85C
bistable 1 coil -10...+85C
bistable 2 coils -40...+85C
Operate- / release time DC coil typ 8 / 3 ms
Operate- / reset time bistable typ 5 / 4 ms
Bounce time NO / NC contact typ 2 / 3 ms
Vibration resistance DC coil (function) NO / NC contact 20 / 5 g, 30 ... 500 Hz
Shock resistance (destruction) 100 g
Category of protection RTII - flux proof
)
Mounting pcb or on socket *
Mounting distance 0 mm
Resistance to soldering heat flux-proof version 270 C / 10 s
Relay weight 14 g
Packaging unit DC coil, bistable 1 coil 20 / 500 pcs
bistable 2 coils 100 pcs
)
* socket available for 1 coil version only, see Accessories
Accessories
For details see datasheet Accessories Power Relay RT
2
Datasheet Rev. HG1 Dimensions are in mm unless Product specification processing information Schrack section.
Issued 2008/07 otherwise specified and are according to IEC 61810-1. only to be used together
www.tycoelectronics.com shown for reference purposes Product data, technical para- with the 'Definitions' at Specifications subject to
www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.