General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1-AP n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact n Sensitive coil 400mW n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85C n WG version: product in accordance to IEC 60335-1 Typical applications F0144-C Boiler control, timers, garage door control, POS automation, interface modules VZb Approvals Coil Data VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Coil voltage range 5 to 110VDC Technical data of approved types on request Operative range, IEC 61810 2 Coil insulation system according UL class F Contact Data 12A 16A Contact arrangement 1 form C (CO) or 1 form A (NO) Coil versions, DC coil Rated voltage 250VAC Coil Rated Operate Release Coil Rated coil Max. switching voltage 400VAC code voltage voltage voltage resistance power Rated current 12A 16A VDC VDC VDC 10% mW Limiting continuous current 12A 16A, UL: 20A 005 5 3.5 0.5 62 403 Limiting making current 006 6 4.2 0.6 90 400 max. 4s, duty factor 10% 25A 30A 009 9 6.3 0.9 200 400 Breaking capacity max. 3000VA 4000VA 012 12 8.4 1.2 360 400 Contact Material AgNi 90/10 024 24 16.8 2.4 1440 400 -1 Frequency of operation, with/without load 360/72000h 048 48 33.6 4.8 5520 417 All figures are given for coil without pre-energization, at ambient temperature +23C. Operate/release time max., DC coil 8/6ms Other coil voltages on request. Bounce time max., DC coil, form A/form B 4/6ms Contact ratings Type Contact Load Cycles IEC 61810 3 RT314 DC-coil A (NO) 16A, 250VAC, cos=1, 85C 30x10 3 RT314 DC-coil C (CO) 16A, 250VAC, cos=1, 85C 10x10 3 RT314 DC-coil A (NO) 10A, 400VAC, cos=1, 85C 150x10 3 RT114 DC-coil A (NO) 12A, 250VAC, cos=1, 85C 50x10 3 RT114 AC-coil A (NO) 12A, 250VAC, cos=1, 70C 100x10 UL 508 3 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85C 6x10 3 RT334 A (NO) 16A, 250VAC, gen. purpose, 85C 50x10 3 RT314 A (NO) 1hp, 240VAC, 40C 1x10 EN60947-5-1 RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 EN60730-1 3 RT314 DC-coil A (NO) 12(2)A, 250VAC, 85C 100x10 Insulation Data 6 Mechanical endurance >30x10 operations Initial dielectric strength between open contacts 1000V rms between contact and coil 5000V rms Clearance/creepage between contact and coil 10/10mm Material group of insulation parts IIIa Tracking index of relay base PTI 250V 1 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1-AP (Continued) Other Data Accessories Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content For details see datasheet Accessories Industrial Power Relay RT refer to the Product Compliance Support Center at NOTE: indicated contact ratings and electrical endurance data for direct www.te.com/customersupport/rohssupportcenter wiring of relays (according IEC 61810-1) for relays mounted on sockets China RoHS compliance no hazardous material over threshold deratings may apply. Resistance to heat and fire WG version according EN60335, par30 Ambient temperature -40 to 85C Category of environmental protection IEC 61810 R TII - flux proof, RTIII - wash tight Vibration resistance (functional), form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g Terminal type PCB-THT, plug-in Weight 14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270C/10s RTIII 260C/5s Packaging/unit tube/20 pcs., box/500 pcs. Dimensions S0272-BB PCB layout / terminal assignment *) With the recommended PCB hole sizes a grid Bottom view on solder pins pattern from 2.5 mm to 2.54 mm can be used. 12 A, pinning 3.5 mm 12 A, pinning 5 mm 16A, pinning 5 mm S0418-CB S0418-CN S0418-CA 1 form C (CO) contact 1 form C (CO) contact 1 form C (CO) contact S0163-BG S0163-BC S0163-BE 1 form A (NO) contact 1 form A (NO) contact 1 form A (NO) contact S0163-BH S0163-BD S0163-BF 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company