RTS3T048 TE Connectivity

General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power n 1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact + AgSnO2) n Mono- or bistable coil n 5kV/10mm coil-contact n Reinforced insulation n Test tab (manual operator) optional for RTT3T bistable versions n WG version: product in accordance to IEC60335-1 n RTS3T: Electronic ballast UL508/NEMA 410 rated n RTSET: 8A Electronic ballast rated Typical applications LED lighting systems, filament and incandescent lamp loads, movement detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus system actuators. Zb Approvals VDE Cert. No. 40007571,UL E214025, cCSAus 1142018 Technical data of approved types on request. Contact Data RT.3T / RTSET RTS3L Contact arrangement 1 form A (NO) contact Rated voltage 250VAC Max. switching voltage 480VAC Rated current 16A Limiting continuous current 16A 20A Limiting making current, max. 20ms (incand. lamps) 165A peak 120A peak max. 200s 800A peak Breaking capacity max. 4000VA Contact Data (continued), Contact material W (pre-make cont.) AgSnO 2 +AgSnO Mechanical endurance RT.3T / RTSET RTS3L 2 6 6 Contact style pre-make contact single contact DC coil >5x10 ops. >10x10 ops. 6 6 6 -1 Frequency of operation, with/without load 360/3600h bistable version >3x10 / >1x10 ops. >5x10 ops. 3 Operate/release time max., DC coil 10/5ms tab manually operated >1x10 ops. - Operate/Reset time max., bistable version 10/10ms Bounce time max. 4ms Coil Data, monostable DC coil RT.3T RTSET RTS3L Contact ratings Coil voltage range 5 to 110VDC Type Contact Load Cycles Operative range, IEC 61810 2 IEC 61810 Coil insulation system according UL1446 class F 3 RTS3L A (NO) 20A, 250VAC resistive, 70C 20x10 3 RTS3L monostable A (NO) 16A, 250VAC resistive, 85C 100x10 Coil versions, monostable DC coil 3 RTS3T A (NO) 16A, 250VAC resistive, 85C 5x10 Coil Rated Operate Release Coil Rated coil In process: code voltage voltage voltage resistance power Type Contact Load Cycles 1) VDC VDC VDC 10% mW 3 RTSET A (NO) 16A, 250VAC resistive, 85C 5x10 005 5 3.5 0.5 62 403 UL 508 006 6 4.2 0.6 90 400 3 RTS3L A (NO) 20A, 250VAC, general purpose, 70C 20x10 009 9 6.3 0.9 203 400 3 RTS3L A (NO) 16A, 250VAC, resistive, 85C 50x10 012 12 8.4 1.2 360 400 3 RTS3L A (NO) TV8, 240VAC, 40C 25x10 024 24 16.8 2.4 1440 400 3 RTS3L A (NO) 1.5hp, 240VAC, 70C 30x10 048 48 33.6 4.8 5520 417 RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC, 1) 060 60 42.0 6.0 8570 420 3 60Hz, 50C 6x10 1) 110 110 77.0 11.0 28800 420 * 3 RTS3T A (NO) 2A, 480VAC, magnetic ballast, 80C 10x10 1) Coil resistance 12%. * 3 RTS3T A (NO) 2A, 480VAC, electronic ballast, 80C 10x10 All figures are given for coil without pre-energization, at ambient temperature +23C. 3 RTS3T A (NO) 3A, 277VAC, electronic ballast, 80C 15x10 Other coil voltages on request. 3 RTS3T A (NO) 5A, 120VAC, electronic ballast, 80C 15x10 3 RTS3T A (NO) 5A, 277VAC, electronic ballast, 85C 10x10 RTS3T A (NO) 5A, 347VAC, electronic ballast, 105C * 3 with z.c 10x10 3 RTS3T A (NO) 5A, 347VAC, magnetic ballast, 105C 10x10 * 3 RTS3T A (NO) 3A, 480VAC, magnetic ballast, 105C 10x10 3 RTSET A (NO) 16A, 250VAC, general purpose, 85C 5x10 RTSET A (NO) 8A, 277VAC, electronic ballast, 85C 6x10 3 RTSET A (NO) 5A, 277VAC, electronic ballast, 85C 10x10 3 RTSET A (NO) 3A, 277VAC, electronic ballast, 85C 20x10 3 RTSET A (NO) 5A, 120VAC, electronic ballast, 85C 20x10 * Special test conditions available on request 1 01-2019, Rev. 0119 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power (Continued) Coil Data (continued), bistable coils 1 coil 2 coils Magnetic system polarized, bistable Coil voltage range 3 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration 30ms/1min at <10% duty factor Coil insulation system according UL1446 class F Coil Data RT.3T RTS3L Coil versions, bistable Coil Rated Set Reset Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC 10% mW Coil versions, bistable 1 coil A03 3 2.1 1.7 21 429 A12 12 8.4 6.6 360 400 Insulation Data A24 24 16.8 13.2 1440 400 Initial dielectric strength Coil versions, bistable 2 coils between open contacts 1250V F03 3 2.1 1.7 15 600 rms between contact and coil 5000V F12 12 8.4 6.6 240 600 rms Clearance/creepage F24 24 16.8 13.2 886 650 All figures are given for coil without pre-energization, at ambient temperature +23C. between contact and coil 10/10mm Other coil voltages on request. Material group of insulation parts IIIa Tracking index of relay base PTI 250V Coil Data RTSET Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Coil versions, bistable refer to the Product Compliance Support Center at Coil Rated Set Reset Coil Rated coil www.te.com/customersupport/rohssupportcenter code voltage voltage voltage resistance power Ambient temperature RT.3T / RTS3L VDC VDC VDC 10% mW monostable DC coil -40 to 105C Coil versions, bistable 1 coil bistable 1 coil -10 to 105C A03 3 2.1 1.8 21 429 bistable 2 coils -40 to 105C A12 12 8.4 7.2 360 400 Ambient temperature RTSET A24 24 16.8 14.4 1440 400 monostable DC coil -40 to 85C Coil versions, bistable 2 coils bistable 1 coil -10 to 85C F03 3 2.1 1.8 15 600 F12 12 8.4 7.2 240 600 bistable 2 coils -40 to 85C F24 24 16.8 14.4 886 650 All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. RT.3T / RTSET RTS3L Category of environmental protection Bistable coils - operation IEC 61810 RTII - flux proof Version 1 coil 2 coils RTIII - wash tight available upon request Coil terminals A1 A2 A1 A3 A2 Vibration resistance (functional), 10g 20g Operate + - + - monostable version Reset - + - + Shock resistance (destructive) 100g Contact position not defined at delivery 2) Terminal type PCB-THT, plug-in Weight, without / with test tab 14/16g 14g/- Resistance to soldering heat THT IEC 60068-2-20 270C/10s RT.3T / RTSET RTS3L Packaging/unit without test tab tube/20 pcs., tube/20 pcs., box/500 pcs. box/500 pcs. with test tab tray/25 pcs., - box/100 pcs. - 2) RTT3T or bistable 2 coil version: PCB mounting only. See Accessories. Accessories RTS. For details see datasheet Accessories Industrial Power Relay R T Socket available for 1 coil version only. NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1) for relays mounted on sockets deratings may apply. 2 01-2019, Rev. 0119 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.