S02-17-R-3 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Name Product Dimensions Cable Dimensions Product Rev. Product Rev. Product Rev. Product Rev. B C H E F G D A1.75 J0.5 20 AWG 22 AWG 24 AWG 26 AWG (A0.07) min min min max min min max (J0.02) S02-01-R D S02-06-R D S02-11-R D S02-16-R D 16.5 1.90 2.65 8.25 2.65 0.90 0.50 1.90 7.5 (0.650) (0.075) (0.105) (0.325) (0.105) (0.035) (0.020) (0.075) (0.295) S02-02-R D S02-07-R D S02-12-R D S02-17-R D 16.5 2.65 3.68 8.25 3.68 1.40 0.75 2.65 7.5 (0.650) (0.105) (0.145) (0.325) (0.145) (0.055) (0.030) (0.105) (0.295) S02-03-R D S02-08-R D S02-13-R D S02-18-R D 16.5 4.30 5.08 8.25 5.08 2.15 1.25 4.30 7.5 (0.650) (0.170) (0.200) (0.325) (0.200) (0.085) (0.050) (0.170) (0.295) S02-04-R D S02-09-R D S02-14-R D S02-19-R D 19.1 5.95 6.45 8.25 6.45 3.30 1.80 5.95 7.5 (0.750) (0.235) (0.255) (0.325) (0.255) (0.130) (0.070) (0.235) (0.295) S02-05-R D S02-10-R D S02-15-R D S02-20-R D 19.1 7.00 7.60 8.25 7.60 4.30 2.50 7.00 7.5 (0.750) (0.275) (0.300) (0.325) (0.300) (0.170) (0.100) (0.275) (0.295) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change: violet to colorless. 3. MELTABLE RING: Environment resistant thermoplastic. Color:blue. 4. GROUND LEAD: MIL-W-22759/32-AA-90 lead gauge per table. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables meeting the following criteria: Dimensions: Per table. Jacket rating: 125C. Shield plating: Tin or silver. Jacket material: See M83519/2 or consult Raychem. 2. Parts are qualified to M83519/2. 3. For assembly information, refer to Raychem document RCPS-100-70. For best results, prepare the cable as shown: * A trademark of TE Connectivity. TITLE: TE Connectivity RAYCHEM 300 Constitutional Drive SOLDERSLEEVE* SHIELD TERMINATOR, Menlo Park, CA 94025 USA IMMERSION RESISTANT, MIL-S-83519/2 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO: S02-XX-R INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: TE Connectivity reserves the right to DATE: DOC ISSUE: 0.00 N/A N/A amend this drawing at any time. Users 16-Apr-11 4 0.0 N/A should evaluate the suitability of the 0 N/A ROUGHNESS product for their application. IN MICRON DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: PROD. REV.: SCALE: SIZE: SHEET: M. FORONDA 06090 D970095 D981342 SEE TABLE None A 1 of 1 Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.