Low Ohmic - Current Sense Resistors Type SBL Series Type SBL Series Characteristics - Electrical Resistance Values (4 Watt): R005, R01, R015, R018, R022, R033, R047, R051 Resistance Values (5 Watt): R01, R015, R018, R022, R033, R047, R051 Resistance Tolerance: 5% Rated Dissipation (4 Watt): 4 Watts at 70C Rated Dissipation (5 Watt): 5 Watts at 70C Dielectric Strength: 2000 Volts Insulation Resistance: < 10000 Mohms Maximum Continuous Working Voltage: Power x Resistance AC RMS The SBL Series is a low ohmic Characteristics - non-inductive resistor with a low Mechanical temperature coefficient in a fully Climatic Category: -55 / 250 / 56 insulated ceramic housing. It is Temperature Range: -55C to +250C ideal for applications in power supply Derating: Linear from 70C to 250C regulation, motor control current monitoring, feedback control loops, Characteristics - overload sensors and radio frequency Environmental applications. The solid metal element has welded copper terminals and is Resistance to Solder Heat: 260C ( R 0.2% typical) encapsulated in a ceramic housing, Terminal Strength: 3lb pull test filled with compressed silica sand. Solderability: Meets MIL Std 202 Marking: Black ink on ceramic body - Manufacturer, Resistance Value and Tolerance Key Features 4 Watts & 5 Watts Versions Solid Metal Element Temperature Rise (K) Non-Inductive Low Temperature Coefficient 200 High Reliability Custom Design 150 (Subject to Volume) 4 Watt Device Available 100 in Distribution 50 0 0 20 40 60 80 100 120 (%) Power Rating Dimensions How to Order SBL 4 R051 J Common Part Power Dissipation Resistance Value Tolerance R005, R01, R015, R018, 4 - 4 Watts J 5% R022, R033, R047, R051 SBL - Standard (5 Watt Version only 5 - 5 Watts F 1% R01 - R051) Literature No. 1773279 Dimensions are shown for Dimensions are in millimetres Specifications subject to www.tycoelectronics.com Issued: 04-05 reference purposes only. unless otherwise specified. change. passives.tycoelectronics.com Temperature Rise