SBPH100375WE2.5 TE Connectivity

SBP Self Laminating Wire and Cable Markers Technical Datasheet TTDS-211 Revision 9 - July 2017 SBP is a clear vinyl film with a white thermal transfer printable area. On application, the clear film over-laminates and protects the printed area. SBP is supplied with a permanent acrylic based adhesive and on a white liner with reference holes for printer sensor detection. The self laminating feature protects the printed area from exposure to fluids, moisture and mechanical abrasion. SBP is UL recognised to PGIS2 for indoor and outdoor use as wrap or flag (tag) in accordance with ANSI/UL 817, Cord Sets and Power-Supply Cords and UL 2238 Certification Requirement Decision (CRD) of the Standard for Cable Assemblies and Fitting for Industrial Control and Distribution. For conditions of use see UL file MH61871. Verification testing to UL969 sections... The SBP label solution comprises of a complete identification system with printers, software, ribbons and more than 18 standard label sizes. The label can be used in WRAP self-laminating mode and FLAG self-laminating mode down to a diameter of 2.0mm (0.08 inch). SBP print performance and durability can only be guaranteed when: Printed using TE Connectivity printers and ribbons as defined in TE document 411-121005 Applied on wire & cable using repeatable self-laminated labelling guide 411-121050 PAGE 1 INDUSTRIAL /// TTDS-211 SBP TECHNICAL DATA SHEET SBP Features Temperature Rating Thermal Transfer Printable Operating Temperature Range Over lamination protects the printed area and ena- -40 to 110C (-40F to 230F) bles a higher level of print durability Minimum Application Temperature 10C (50F) Range of sizes and colors available (see page 4) Variety of label layouts and roll core diameters, Useable down to 2.0mm diameter, even on Fluoropolymer wire jackets. Specifications / Approvals Industry PGIS2 - file MH61871 Applications Design for Environment Ideal for wire and cable identification in general. Does not contain any declarable or prohibited sub- stances from the UNIFE Railway Industry Substances Excellent conformability to round, irregular or flexible List surfaces including flat ribbon cables. Further information and a downloadable declaration Small diameter cables and wire (2.0mm / 0.08 inch covering RoHS and REACH compliance can be found or greater) in wrap mode or flag mode. at the TE Product Compliance Support Centre: Industrial, Automotive, Rail, Aerospace and Defense,