SPECIFICATION CONTROL DRAWING
Product Revision Product Dimensions Cable Dimensions
Ident
Product B C D E F G
L 1.75
Code
Name min min max max min min
(L 0.075)
16.50 1.90 2.67 1.90 2.67 0.90 0.50
SO175-1-55-22-95 A SO1751R
(0.650) (0.075) (0.105) (0.075) (0.105) (0.035) (0.020)
16.50 2.67 3.68 2.67 3.68 1.40 0.75
SO175-2-55-22-95 A SO1752R
(0.650) (0.105) (0.145) (0.105) (0.145) (0.055) (0.030)
16.50 4.32 5.08 4.32 5.08 2.15 1.25
SO175-3-55-22-95 A SO1753R
(0.650) (0.170) (0.200) (0.170) (0.200) (0.085) (0.050)
19.10 5.97 6.48 5.97 6.48 3.30 1.80
SO175-4-55-22-95 A SO1754R
(0.750) (0.235) (0.255) (0.235) (0.255) (0.130) (0.070)
19.10 6.98 7.62 6.98 7.62 4.30 2.50
SO175-5-55-22-95 A SO1755R
(0.750) (0.275) (0.300) (0.275) (0.300) (0.170) (0.100)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn96 per ANSI/J-STD-006.
FLUX: TYPE ROM1 per ANSI/J-STD-004.
THERMAL INDICATOR: Fusible ring, melt point: 232C, completely melted at 240C.
3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue.
4. PRE-INSTALLED LEAD: Raychem 55A0813-22-95 in accordance with MIL-W-22759/41-22-95 AWG22 stranded
nickel-plated copper. Color: white with green stripe.
APPLICATION
1. These parts are designed to provide an environment resistant shield termination on cables, rated for 150C minimum,
meeting the dimensional criteria listed, having nickel-plated shields and insulations compatible with the insert material. For
compatible insulations, see MIL-S-83519/1 or consult Tyco Electronics/Raychem.
2. When installed per Tyco Electronics/Raychem process standard RCPS-100-70, assemblies will meet performance requirement
Raychem Specification RT-1404, MIL-S-83519, and 514.1920/99 Aerospatiale Matra Specification.
3. Parts shall be marked with identification code per table.
4. Temperature range: -55C to +175 C.
For best results, prepare the cable as shown:
G is the minimum diameter on which the sleeve will seal.
TITLE:
SOLDERSLEEVE DEVICE SHIELD TERMINATION
Raychem
305 Constitution Drive,
WITH LEADS, IMMERSION RESISTANT
Menlo Park, CA. 94025, USA
(175 C, LEAD-FREE)
DOCUMENT NO.:
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
SO175-X-55-22-95
TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to amend
0.00 N/A this drawing at any time. Users should
PROD. REV.: DOC. ISSUE: DATE:
0.0 N/A ROUGHNESS IN evaluate the suitability of the product for their
SEE TABLE 1 25-Apr-03
0 N/A MICRON application.
PREPARED BY: REPLACES: DCR NUMBER: SCALE: SIZE: SHEET:
mforonda D020142 D030222 None A 1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Solder & Shield Tubing category:
Click to view products by TE Connectivity manufacturer:
Other Similar products are found below :
CTC-0062-20-9/5-9 CTC-0062-22-9/5-9 680441-000 D-150-0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 982127-1 D-436-
0127CS391 D-436-0182CS246 D-436-37CS2651 D-436-58CS246 D-436-61CS246 D-436-82-CS2621 D-750-0005CS2493 E53797N001
S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 SO63-2-9036-22CS2677 SO63-3-01CS293 SO63-3-9036-20CS2677 SO63-3-9036-
22CS2677 SO63-4-9036-20CS2677 SO63-5-9036-22CS2677 CC1525-000 CTA-0025 D-108-01CS227 D-108-07CS436 D-128-0010 D-141-
0108CS404 D-142-51-202-7754 D-144-41CS1371 D-150-0231-NRCS2896 B-801-18-01 515-9 C67137-000 D-436-36CS2908 D-436-
37CS2908 D-436-52CS246 D-436-83CS2705 D-438-0102 LSS-26-8A 427243-000 D-106-2012 D-300-08CS1108 UWCS-2U/7.6-1C/5.8
620026-000 B-004-00 699055-000 140945-000