SO63-2-00 SolderSleeve Shield Terminators, Shield Terminator, Operating Temperature (Max) 150 C, Expanded Inside Diameter (Min) .105 in 2.67 mm SO63-2-00 ACTIVE Raychem TE Internal : 758539-000 SolderSleeve Shield Terminators, Shield Terminator, Operating Temperature (Max) 150 C, Expanded Inside Diameter (Min) .105 in 2.67 mm View on TE.com> Wire Protection & Management > Interconnect Devices > SolderSleeve Shield Terminators SolderSleeve Shield Terminator Product Type: Shield Terminator Operating Temperature (Max): 150 C Expanded Inside Diameter (Min): 2.67 mm .105 in Recovered Inside Diameter (Max): .76 mm .03 in Pre-Installed Lead: No Features Product Type Features Splice Type Shield Terminator Temperature Indicator Yes Temperature Indicator Type Fusible Ring SolderSleeve Shield Terminator Product Type Shield Terminator Configuration Features Pre-Installed Lead No Termination Features Termination Method Solder Dimensions Overall Length 16.5 mm .65 in Dielectric Outside Diameter (Max) .75 mm .03 in Shield Outside Diameter (Min) 1.4 mm .055 in Jacket Outside Diameter 2.65 mm .105 in Expanded Inside Diameter (Min) 2.67 mm .105 in Recovered Inside Diameter (Max) .76 mm .03 in Usage Conditions Operating Temperature (Max) 150 C Resistance Properties Immersion Protection Wire Temperature (Max) 125 C 08/19/2021 09:50PM Page1 For support call+1 800 522 6752 SO63-2-00 SolderSleeve Shield Terminators, Shield Terminator, Operating Temperature (Max) 150 C, Expanded Inside Diameter (Min) .105 in 2.67 mm Resistance Properties Immersion Protection Wire Temperature (Max) 125 C Industry Standards MIL/NAS Specification (MIL-S-83519, NAS-1747) No Government Qualified No Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Not Compliant EU ELV Directive 2000/53/EC Not Compliant China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2021 (211) Candidate List Declared Against: JAN 2021 (211) SVHC > Threshold: Pb (37% in Solder) Article Safe Usage Statements: Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Recycle if possible and dispose of the article by following all applicable governmental regulations relevant to your geographic location. Halogen Content Out of Scope - excluded from Halogen requirements Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on requirements for substances in articles posted at this URL: