CUSTOMER DRAWING Product Product Dimensions Cable Dimensions Name Ident L1.75 B C H E F D Code min min min max min max (L0.075) SO96-1-55-22-95 SO961R 16.5 1.90 2.67 8.20 2.67 0.90 1.90 (0.650) (0.075) (0.105) (0.322) (0.105) (0.035) (0.075) SO96-2-55-22-95 SO962R 16.5 2.67 3.68 8.20 3.68 1.40 2.67 (0.650) (0.105) (0.145) (0.322) (0.145) (0.055) (0.105) SO96-3-55-22-95 SO963R 16.5 4.32 5.08 8.20 5.08 2.15 4.32 (0.650) (0.170) (0.200) (0.322) (0.200) (0.085) (0.170) SO96-4-55-22-95 SO964R 19.1 5.97 6.48 8.20 6.48 3.30 5.97 (0.750) (0.235) (0.255) (0.322) (0.255) (0.130) (0.235) SO96-5-55-22-95 SO965R 19.1 6.98 7.62 8.20 7.62 4.30 6.98 (0.750) (0.275) (0.300) (0.322) (0.300) (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change orange to colorless. 3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: Raychem 55A0813-22-95 in accordance with MIL-W-22759/41-22-95 AWG22 stranded nickel plated copper. Color: white with green stripe. APPLICATION 1. These parts are designed to an environment resistant shield termination on cables, rated for 150 C minimum, meeting the dimensional criteria listed, having nickel-plated shields and insulations compatible with the insert material. See MIL-S-83519/1 or consult Raychem. 2. Temperature range: -55 C to +175 C. 3. Parts shall be marked with identification code per table. 4. Install using TE Connectivity-approved convection or infra-red heating tools in accordance with Raychem Process Standard RCPS-100-70. Infrared tools are not recommended for use with black jackets. For best results, prepare the wire as shown: TE Connectivity, TE connectivity (logo), Raychem, Thermofit, and SolderSleeve are trademarks TITLE: Raychem SOLDERSLEEVE DEVICE SHIELD THERMOFIT TERMINATION WITH LEADS, HIGH DEVICES TEMPERATURE IMMERSION RESISTANT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: SO96-X-55-22-95 INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend Revision: Issue Date: 0.00 N/A this drawing at any time. Users should April 2020 A 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. DRAWN BY: DATE: SCALE: SIZE: SHEET: ECO: ECO-20-004961 M. FORONDA 06-Jan-00 None A 1 of 1 Print Date: 16-Apr-20 If this document is printed it becomes uncontrolled. Check for the latest revision X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 899170-000 620040N001 620069N003 CTA-0050-01 629624-000 6500750004 6501390002 CX0781-000 696396-000 697080-000 D-150- 0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 715325N001 908357N001 982127-1 D-436-0182CS246 D-436-37CS2651 D-436- 61CS246 D-436-82-CS2621 D-659-0087 E53797N001 CB0213-000 CB0219-000 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 ST18-2-00 FLX40-020-04-CS8651 325534-000 CTA-0025 D-108-07CS436 D-128-0010 D-141-0108CS404 D-144-41CS1371 D-150-0231- NRCS2896 D-150-1011 395947-000 427243N001 B-801-18-01 515-9 C67137-000 CB0220-000 D-436-0185CS1102 D-436-36CS2908 D- 436-37CS2908 D-436-52CS246 D-436-83CS2705 D44133N001 LSS-26-8A