General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR4 D/M n 4 pole relay with force guided contacts according to EN EN61810-3 (formerly EN50205) n Compact design and space efficient Typical applications Emergency shut-off, press control, machine control, elevator and escalator control, safety relays F0244-C Z Approvals Coil data VDE Cert. No. 40005334, UL E214025, TUV 968/EL 230, Coil voltage range 5 to 110VDC CCC 2019010303217075 Technical data of approved types on request Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil Contact Data code voltage voltage voltage resistance power Contact arrangement 3 form A + 1 form B contacts VDC VDC VDC 10% mW 3 NO + 1 NC 005 5 3.8 0.5 31 806 2 form A + 2 form B contacts 006 6 4.5 0.6 45 800 2 NO + 2 NC 009 9 6.8 0.9 101 802 Rated voltage 250VAC 012 12 9.0 1.2 180 800 Max. switching voltage 400VAC 015 15 11.3 1.5 281 801 Rated current 8A 018 18 13.5 1.8 405 800 Contact material AgSnO 021 21 16.0 2.1 551 800 2 Contact style single contact, force guided 024 24 18.0 2.4 720 800 type A according to EN61810-3 036 36 27.0 3.6 1620 800 (formerly EN50205) 040 40 30.0 4.0 2000 800 Min. recommended contact load 5V/10mA 048 48 36.0 4.8 2880 800 Initial contact resistance 100m at 1A, 24VDC 060 60 45.0 6.0 4500 800 20 at 10mA, 5VDC 085 85 63.8 8.5 9031 800 -1 Frequency of operation, with/without load 6/150min 110 110 83.0 11.0 15125 800 Contact ratings All figures are given for coil without pre-energization, at ambient temperature +23C. IEC60947-5-1, AC15-3A on 1 form A (NO) contact DC13-3A 6 Mechanical endurance 10x10 operations 1 01-2020, Rev. 0120 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR4 D/M (Continued) Insulation Data PCB layout / terminal assignment Initial dielectric strength Bottom view on solder pins between open contacts 1500Vrms between contact and coil 4000Vrms between adjacent contacts 2500Vrms Clearance/creepage between open contacts microdisconnection between contact and coil 10/10mm between adjacent contacts 3/3.5mm Insulation to EN 50178, type of insulation between contact and coil reinforced S0413-BC between adjacent contacts basic Other Data 2 form A + 2 form B, 2 NO + 2 NC contacts Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -25 to 70C Category of environmental Protection IEC 61 810 RTIII Weight 30g S0413-BB Resistance to soldering heat THT DimensionsIEC 60068-2-20 260C/5s Packaging/unit tube/10 pcs. 3 form A + 1 form B, 3 NO + 1 NC contacts For more detailed information see product specification 2158002 S0413-BA S0412-BH Product code structure Typical product code SR4 D 4 012 Type SR4 Relay with force guided contacts SR4 Contact arrangement D 2 form A + 2 form B contacts (2 NO + 2 NC) M 3 form A + 1 form B contacts (3 NO + 1 NC) Contact material 4 AgSnO 2 Coil Coil code: please refer to coil versions table (e.g. 012=12VDC) Other types on request 2 01-2020, Rev. 0120 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company