STXR40AB00-1616AI TE Connectivity

ASSY USED ON: TINEL LOCK RING 3 CODE 40 - TINEL-LOCK BACKSHELL STXR40AB00-1616AI-S SERIES STXR: RING INCLUDED (SEE RING OPTION) STX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE ORDER NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR STX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-STXR40AB00-2018). RING SHALL BEAR NO MARKING. 5. TINEL-LOCK RING ENTRY SIZE AND BRAID DESIGNATOR IS TO BE SPECIFIED IN PART NUMBER WHEN ORDERING. 6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W, D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PARA. 3. 5. 7. 7. PREFIX S DENOTES THAT THE ADAPTER HAS A LARGER ENTRY THAN THE STANDARD TXR BUT IS STILL OF THE TYPE 1 DESIGN. 8. SEE SHEET 3 FOR TABLE OF ENTRY SIZE APPLICABLE TO THE STXR RANGE. FOR ENTRY SIZE LARGER THAN MAX INDICATED, CONTACT TE. MAX ENTRY ONLY APPLIES TO ANGLES 45 & 90. 9. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 20/01/2015 NOT TO CHECKED 20/01/2015 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 29/01/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 10/08/2015 ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-38999 SERIES III & IV D 18/02/2015 H.SMITH REVISED PER ECO-15-002339 10/08/2015 E REVISED PER ECO-15-010970 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. STXR40 E 1 POLAMCO/TE CAGE CODE: U5792D ASSY USED ON: 26,50 C SILICONE O-RING PART MARK STRAIGHT BACKSHELL 45 BACKSHELL HERE W W T T 90 BACKSHELL 90 BACKSHELL STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE MODIFICATION S SELF-LOCKING MECHANISM DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 20/01/2015 NOT TO CHECKED 20/01/2015 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 29/01/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 10/08/2015 ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-38999 SERIES III & IV D 18/02/2015 H.SMITH REVISED PER ECO-15-002339 10/08/2015 E REVISED PER ECO-15-010970 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. STXR40 E 2 POLAMCO/TE CAGE CODE: U5792 B A THREAD XXXX Z E S Y B 9 A THREAD E