General Purpose Relays PCB Relays Miniature Power PCB Relay T7N/T7N-WG n 1 pole 10A, 1 form C (1CO) or 1 form A (1NO) contact n Version T7N-WG with tracking resistance CTI 325 n WG version: Product in accordance to IEC60335-1 Typical applications Domestic appliances, heating control, building control, measurement&control F0189-D VZ Approvals Coil Data T7N: VDE REG.-Nr. 6175, UL E214025 Coil voltage range 5 to 48 VDC T7N-WG: VDE REG.-Nr. 119012, UL E214025 Operative range, IEC 61810 2 Technical data of approved types on request Non-release voltage, % of rated coil voltage 50% Coil insulation system according UL1446 class F Contact Data Contact arrangement 1 form C (1CO) or 1 form A (1NO) Coil versions, DC coil Rated voltage 250VAC Coil Rated Operate Release Coil Rated coil Max. switching voltage 400VAC code voltage voltage voltage resistance power Rated current 10A VDC VDC VDC 10% mW Limiting making current, max 4 s, duty factor 10% 35A 05 5 3.5 0.5 70 357 Breaking capacity max. 2500VA 06 6 4.2 0.6 100 360 Contact material AgSnO , AgCdO 09 9 6.3 0.9 225 360 2 -1 Frequency of operation, with/without load 1800/18000h 12 12 8.4 1.2 400 360 1) Operate/release time max. 9/5ms 18 18 13.5 1.8 900 360 Bounce time max., form A 3ms 24 24 16.8 2.4 1600 360 36 36 25.2 3.6 3600 360 Contact ratings 48 48 33.6 4.8 6400 360 Type Contact Load Cycles 1) 18VDC coil: UL approval only, not registered with VDE. All figures are given for coil without pre-energization, at ambient temperature +23C. IEC 61810 3 Other coil voltages on request. T7NV1D4--WG(-A) A (NO) 10A, 250VAC, cos=1, 85C 100x10 3 T7NS1D4--WG(-A) A (NO) 10A, 250VAC, cos=1, 85C 6x10 3 T7NV5D4--WG(-A) A of C 10A, 250VAC, cos=1, 85C 100x10 3 T7NS5D4--WG(-A) A of C 10A, 250VAC, cos=1, 85C 6x10 3 T7NV5D4--WG(-A) B of C 6A, 250VAC, cos=1, 85C 50x10 3 T7NS5D4- C (CO) 10A/5A, 250VAC, cos=1, 85C 6x10 3 T7NS1D4--WG(-A) A (NO) 10A, 250VAC, cos=1, 85C 6x10 UL 508 3 T7N...D4--WG(-A) A (NO) 10A, 250VAC, resistive, 85C 100x10 3 T7N...D4--WG(-A) A (NO) 1/4hp, 120VAC, motor, 40C 100x10 3 T7N...D4- A (NO) 10A, 250VAC, resistive, 85C 30x10 6 Mechanical endurance, >10x10 operations Insulation Data T7N T7N-WG Initial dielectric strength between open contacts 1000 V 1000 V rms rms between contact and coil 2500 V 2500 V rms rms Clearance/creepage between contact and coil 2/3mm 2.5/3.5mm Material group of insulation parts IIIa IIIa Tracking index of relay base PTI175 PTI325 1 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays Miniature Power PCB Relay T7N/T7N-WG (Continued) Other Data T7N T7N-WG PCB layout / terminal assignment Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Bottom view on solder pins refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire according EN60335, par.30 Ambient temperature -40 to 85C Category of environmental protection IEC 61810 RTIII - wash tight RTII - flux proof (RTII - flux proof) RTIII - wash tight Vibration resistance (functional), form A/form B, 30 to 400Hz >14/8g Shock resistance (destructive) 100g Terminal type PCB-THT Weight 11 g Resistance to soldering heat THT, IEC 60068-2-20 S0260-AA flux proof version 270C/10s wash tight version 260C/5 s Packaging unit 25pcs., 1000 pcs. S0260-AB S0260-AC Dimensions S0349-A Product code structure Typical product code T7N V 1 D 4 -06 -WG Type T7N Miniature Power PCB Relay T7N Version S Wash tight V Flux proof Contact configuration 1 1 form A contact (1 NO) 5 1 form C contact (1 CO) Coil version H DC coil 450mW D DC coil 360mW Contact material 1 AgCdO 4 AgSnO 2 Coil Coil code: please refer to coil versions table Version Blank T7N standard version, CTI 225 WG CTI 325 version, product in accordance with IEC 60335-1 WG-A CTI 325 for relay base only Other types on request 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company