Heat-shrinkable Tubing
RAYCHEM Tubing Products
TAT-125
1
Adhesive-Lined,
Flexible,
Polyolefin Tubing
Product Facts
2:1 shrink ratio
Thin adhesive lining that
bonds to outer tubing and
surface below, forming a
positive environmental seal
Flexibility of both tubing and
adhesive
Moisture seal that is
resistant to bending of the
substrate
Good mechanical strength
and cut-through resistance
Adhesive that bonds to a
wide variety of plastics,
rubbers, and metals,
including polyethylene,
neoprene, lead, and steel
RoHS compliant
Applications Installation Operating Temperature Range
Seals and protects simple Minimum shrink -55C to 110C
in-line splices, bimetallic temperature: 95C [203F] [-67F to 230F]
joints, and components
Minimum full recovery
from fluids, moisture, and
temperature: 121C [250F]
corrosion. Repairs
damaged wire insulation,
especially where flexibility
is required. Provides one-
step electrical insulation
and moisture sealing.
Specifications/Approvals
Series UL* Military Raychem
TAT-125 Type 1 (colors) E85381 AMS-DTL-23053/4*, Class 2 RW-3032
600 V, 125C
TAT-125 Type 2 (clear) RW-3032
*Formerly MIL-I-23053/4 and MIL-DTL-23053/4. Sizes 1/4" through 1 1/2" only.
Available in: Americas Europe Asia Pacific
1-119
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666RAYCHEM Tubing Products
TAT-125 (Continued)
Product Dimensions Inside Diameter Recovered Wall Thickness**
Minimum Maximum Total Wall Adhesive Wall
Size Expanded Recovered After Heating After Heating
as Supplied After Heating (Nominal) (Nominal)
1/8 3.2 [0.125] 1.6 [0.062] 0.69 [0.027] 0.23 [0.009]
3/16 4.8 [0.187] 2.4 [0.093] 0.71 [0.028] 0.25 [0.010]
1/4 6.4 [0.250] 3.2 [0.125] 0.74 [0.029] 0.13 [0.005]
3/8 9.5 [0.375] 4.8 [0.187] 0.74 [0.029] 0.13 [0.005]
1/2 12.7 [0.500] 6.4 [0.250] 0.76 [0.030] 0.15 [0.006]
3/4 19.1 [0.750] 9.5 [0.375] 0.89 [0.035] 0.15 [0.006]
1 25.4 [1.000] 12.7 [0.500] 1.07 [0.042] 0.20 [0.008]
1 1/2 38.1 [1.500] 19.1 [0.750] 1.19 [0.047] 0.28 [0.011]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering Information Color Standard Black (-0)
Nonstandard White (-9), red (-2), blue (-6), yellow (-4), green (-5), brown (-1),
orange (-3), violet (-7), gray (-8), clear (-X , not flame-retardant)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging In 1.2-meter [4-foot] lengths.
Ordering description Specify product name, size and color (for example, TAT-125 1/4-0).
1-120
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666