SPECIFICATION: RW 2525 THIS ISSUE: ISSUE 2 DATE: February 2014 SPECIFICATION RW-2525 Document Number 108-121025 TMS - CCUV SLEEVING 1. SCOPE This Quality Assurance Specification establishes the quality standard for a flexible, flame retarded sleeving specifically designed as UV protection for cable identification markers. The sleeving is suitable for use in wire harness systems requiring high fluid resistance to the effects of nuclear, biological and chemical agent exposure and decontamination as defined in RT-700. 2. REVISION HISTORY Revision Description of change Date Incorporated By Number 1 Replaces RW 2027 rev 3 March 2000 - 2 Format & update February 2014 M Priddle While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company RW-2525 Issue 2 *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. If this document is printed it becomes uncontrolled. Page 2 SPECIFICATION RW-2525 Issue 2 3. APPLICABLE DOCUMENTS ASTM D2671: 1 Standard Methods of Testing Heat-Shrinkable Sleeving for Electrical Use. ASTM G21 Standard Recommended Practice for determining resistance of Synthetic Polymeric Materials to Fungi. AMS-DTL-23053 General Specification for Insulating Sleeving, Electrical, Heat Shrinkable. Mil-H-5606 Hydraulic Fluids, Petroleum Base, Aircraft, Missile and Ordnance. Mil-T-5624 Turbine Fuel, Aviation, Grades JP-4 and JP-5. Mil-L-7808 Lubricating Oil Aircraft Turbine Engine, Synthetic Base. Mil-A-8243 Anti-icing and Deicing- Defrosting Fluid. Mil-L-23699 Lubricating Oil, Aircraft Turbine Engines, Synthetic Base. O-S-1926 Sodium Chloride, Technical. RT-700 (TE) Harness System Chemical Agent Exposure & Decontamination. Subsequent amendments to or revisions of any of the above publications apply to this standard only when incorporated in it by updating or revision. 3.. REQUIREMENTS 3.1 The sleeving shall be homogeneous and essentially free from pinholes, flaws, bubbles, cracks, seams, defects and inclusions. Color shall be clear. 3.2 Dimensions Size Inside Diameter Length Inside Diameter Wall Thickness As Supplied (min) As Supplied (min) After Recovery (max) After recovery (nom) mm mm mm mm 1 3.2 65 1.6 0.25 2 4.8 65 2.4 0.25 3 6.4 65 3.2 0.30 4 9.5 65 4.8 0.30 5 12.7 65 6.4 0.30 6 19.0 65 9.5 0.43 7 25.4 65 12.7 0.48 8 38.0 65 19.0 0.51 9 6.4 32 3.2 0.30 10 12.7 32 6.4 0.30 11 25.4 32 12.7 0.48 12 9.5 32 4.8 0.30 13 19.0 32 9.5 0.43 14 38.0 32 19.0 0.51 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company RW-2525 Issue 2 *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. If this document is printed it becomes uncontrolled.