Heat-Shrink/Cable Markers TMS-SCE Military grade heat shrinkable wire identification sleeves TMS-SCE marker sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements. Made from durable, flame retardant, radiation- crosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves can be used in a wide variety of applications. All TMS-SCE meet the performance requirements of SAE-ASM-DTL-23053/5 class 1. TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL- 23053/5 classes 1 and 3. The marks are permanent immediately after printing and remain legible even when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils. The sleeves meet the mark permanence requirements of SAE AS81531 4.6.2 and MIL-STD-202 both before and after shrinking. Both 2:1 and 3:1 shrink ratios are available. The 2:1 products provide a thick, rugged sleeve wall and are particularly easy to handle. The lightweight 3:1 products provide extremely fast Temperature rating shrinking and cover a wider range of wire diameters, thus Operating temperature range 55C to +135C 67F to +275F simplifying inventory. Minimum recovery temperature +85C +185F The marker sleeves are designed to be printed by computer-driven Maximum storage temperature +40C +104F dot matrix or thermal transfer printers, providing several advantages in terms of reduced errors, cycle time and cost. Specifications/approvals Supplied in a thin, flat ladder format, the sleeves are held Tyco Electronics RW 2511 horizontally between two hole-punched polyester strips. This TTDS-023 configuration feeds directly from the storage box into a Tyco Military SAE-AMS-DTL-23053/5 class1 and 3 (TMS-SCE-2X) Electronics recommended printer. Tyco Electronics recommended SAE-AMS-DTL-23053/5 class 1 (TMS-SCE) ribbons should always be used. The ladder format provides SAE AS81531 4.6.2, MIL-STD-202 Method 215J automatic kitting of the marker sleeves in the desired sequence. A Industry UL Recognized Standard 224, file E35586 standard heat gun with reflector is used to shrink the sleeves onto (TMS-SCE-2X is UL224-VW1 rated. TMS-SCE is UL224- all tube flame test rated) the wire or cable. CSA Certified File 31929 Features and benefits Printer information Permanent identification sleeves Tyco Electronics printer AM6310 (dot matrix) Computer-printable T200 Series (thermal transfer, low volume) Lightweight for aerospace applications T312M (thermal transfer) Tyco Electronics ribbon 1892BK04-RIBBON (dot matrix) Military specification material and print performance TMS-101-RIBBON-4RPSCE (thermal transfer for T208M) 2:1 and 3:1 shrink ratio TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M)) CSA Certified UL Recognized, VW all flame tubing test rated Part numbering system 1 Quick recovery for heat sensitive areas TMS-SCE - 2X -1K- /8- 2.0-S1-9 Color (white or yellow) Scoring (optional) Sleeve length (2.0 nominal) (omit for 2X) Inside diameter, as supplied ( inches) Standard Pack (1,000 pieces) 2X is optional (2:1 shrink ratio: if left out, product will be 3:1) Product family 4 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 Heat Shrink/Cable Markers Wire and Harness ID Products