RW-2500-3 Revision 3 Page 1 of 5 August 2015 Specification RW-2500-3 TE 108-121006 THIN-WALL MARKER SLEEVES TW-TMS Approved Signatories: This document is electronically reviewed and approved by TE Connectivity. TE CONNECTIVITY, SWINDON, UK While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled. RW-2500-3 Revision 3 Page 2 of 5 August 2015 1. REVISION HISTORY Revision Description of change Date Incorporated By Number 14/04/04 1 AFC 256 Alan Kean 14/04/04 2 AFC 372 Alan Kean 3 Refer to PCN 16/07/14 issued 08-2015 Lee Smith 2. SCOPE This specification sheet, when used with RW-2500, defines the product characteristics and performance of TE Connectivity Thin-Wall Marker Sleeves. The printing system developed for this marker sleeve is now obsolete. TE can only guarantee the physio-chemical nature of the product, and not any marking applied using non-recommended printing systems. Where non-standard systems are used, customers are required to carry out their own validation testing. 3. REQUIREMENTS 3.1. MATERIAL The sleeving shall be fabricated from irradiated, thermally stabilized, modified polyvinylidene fluoride compound. It shall be homogeneous and essentially free from flaws, defects, pinholes, bubbles, seams, cracks or inclusions. 3.2. COLOR The sleeves shall be supplied in white, unless otherwise specified. 3.3. PROPERTIES The sleeves shall meet the requirements of Table 3. 3.4. FORM The sleeves shall be cut lengths in accordance with Table 1. TE CONNECTIVITY, SWINDON, UK While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled.