TXR40AB00-2012AI2-CS2472 TE Connectivity

ASSY USED ON: TINEL LOCK RING 3 CODE 40 - TINEL-LOCK BACKSHELL TXR40AB00-1608AI-S SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR40AB00-1206). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W, D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PARA. 3. 5. 7. 7. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 04/12/2014 NOT TO CHECKED 04/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 04/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 15/06/2015 ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-38999 SERIES III & IV H.SMITH K 11.02.15 REVISED PER ECO-15-002200 D.JONES L REVISED PER ECO-17-009011 21.06.17 TE CONNE CTIVITY - POLAM CO LTD RE SE RV ES TH E RIGH T TO AM E ND TH IS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORM ATIO N SET FORTH HE RE ON AT ANY T IM E . USE RS SH OULD IND EPENDE NTLY E VALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. TXR40 L 1 POLAMCO/TE CAGE CODE: U5792G D ASSY USED ON: IF MAX ENTRY IS EXCEEDED BACKSHELL ALTERNATIVE ALTERNATIVE WILL BE SUPPLIED AS TYPE 2 PROFILE PROFILE 16,80 0,50 26,50 26,50 PART MARK 5 PART MARK HERE HERE STRAIGHT BACKSHELL - TYPE 2 STRAIGHT BACKSHELL - TYPE 1 C 16,80 0,50 F 45 BACKSHELL - TYPE 1 45 BACKSHELL - TYPE 2 H W 16,80 0,50 M T 90 BACKSHELL - TYPE 2 90 BACKSHELL - TYPE 1 H W 16,80 0,50 T M 90 BACKSHELL - TYPE 1 90 BACKSHELL - TYPE 2 STAINLESS STEEL AND STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE NICKEL ALUMINIUM BRONZE DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 04/12/2014 NOT TO CHECKED 04/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 04/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 15/06/2015 ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-38999 SERIES III & IV H.SMITH K 11.02.15 REVISED PER ECO-15-002200 D.JONES L REVISED PER ECO-17-009011 21.06.17 TE CONNE CTIVITY - POLAM CO LTD RE SE RV ES TH E RIGH T TO AM E ND TH IS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORM ATIO N SET FORTH HE RE ON AT ANY T IM E . USE RS SH OULD IND EPENDE NTLY E VALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. TXR40 L 2 POLAMCO/TE CAGE CODE: U5792 XXXX B A THREAD XXXX E Z S E Y K B A THREAD J J