Versafit V2 PBBs Highly flame-retardant, low recovery PBBOs temperature, metric-sized heat-shrinkable tubing Versafit V2 heat-shrinkable tubing is are classified as environmentally Bundles wires for very flexible a cost-effective, environmentally hazardous substances. light-duty harnesses. friendly choice for many commercial Strain-relieves electrical wire applications. V2 tubing is made from Compared to noncrosslinked connections for long-term reliability. a specially formulated, crosslinked materials, V2 tubing has a higher polyolefin with low recovery temperature rating and exhibits better V2 tubing offers a faster, easier, temperature, excellent flexibility, thermal stability and resistance to more reliable replacement for and high flame-retardance (VW-1). physical abuse. molding in place, dip coating, and tape wrapping. Unlike other typical flame-retardant V2 tubing performs a variety of tubings, V2 tubing is free of functions in commercial applications: V2 is UL-recognized and CSA- polybrominated biphenyls (PBBs) Electrically insulates and protects certified at 125C, 600 V, with and poly-brominated biphenyl oxides in-line components, disconnect UL VW-1 and CSA OFT flame- (PBBOs). In Europe, these chemicals terminals, and splices. retardancy ratings. Temperature rating Full recovery temperature: 90C Continuous operating temperature: 45C to 125C Specifications* Type Raychem UL CSA Versafit RW-3023 E35586 VW-1 LR31929 VW-1 * When ordering, always specify latest issue. Dimensions (millimeters) W Expanded as supplied Fully recovered after heating D d As supplied Fully recovered As supplied Fully recovered D Wall d (max.) W (min.) D Wall d (max.) W (min.) Inside thickness Inside Wall Inside thickness Inside Wall Size diameter (nominal) diameter thickness** Size diameter (nominal) diameter thickness** 1.0 1.6 0.2 0.20 0.50 0.33 11.0 11.4 0.3 0.30 5.5 0.56 1.5 2.1 0.2 0.20 0.75 0.35 12.0 12.7 0.3 0.30 6.0 0.56 2.0 2.6 0.2 0.25 1.00 0.43 13.0 13.5 0.3 0.35 6.5 0.66 2.5 3.1 0.2 0.25 1.25 0.43 14.0 14.4 0.4 0.35 7.0 0.68 3.0 3.6 0.2 0.25 1.50 0.43 15.0 15.7 0.4 0.35 7.5 0.68 3.5 4.1 0.3 0.25 1.75 0.43 16.0 16.9 0.4 0.35 8.0 0.68 4.0 4.6 0.3 0.25 2.00 0.43 18.0 19.0 0.4 0.40 9.0 0.76 5.0 5.6 0.3 0.30 2.50 0.56 20.0 21.4 0.4 0.40 10.0 0.76 6.0 6.6 0.3 0.30 3.00 0.56 22.0 23.2 0.4 0.45 11.0 0.89 7.0 7.6 0.3 0.30 3.50 0.56 25.0 26.8 0.4 0.45 12.5 0.89 8.0 8.6 0.3 0.30 4.00 0.56 27.0 28.2 0.5 0.45 12.5 0.89 9.0 9.6 0.3 0.30 4.50 0.56 28.0 30.0 0.5 0.45 14.0 0.89 10.0 10.4 0.3 0.30 5.00 0.56 30.0 32.1 0.5 0.45 15.0 0.89 **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering information Colors Standard Black Nonstandard Red, blue, yellow, green, white, orange, brown, violet, gray Size selection Always order the largest size that will shrink snugly over the component being covered. Standard packaging On spools Marking Marked with UL, CSA, and Japan -F- Mark legends. Ordering description Specify product name, size, and color for example, V2 2.0-0 (0=Black).Specification values Property Unit Requirement Method of test Physical Dimensions mm See reverse ASTM D 2671 Longitudinal change ASTM D 2671 percent +1, 5 ASTM D 2671 UL 224 percent +3, 3 UL 224 Eccentricity (recovered) percent 30 maximum ASTM D 2671 Tensile strength MPa (psi) 10.3 (1500) minimum ASTM D 2671 Ultimate elongation percent 200 minimum ASTM D 2671 4 Secant modulus (as supplied) MPa (psi) 172 (2.5 x 10 ) maximum ASTM D 2671 Low-temperature flexibility No cracking UL 224 (1 hour at 30C/22F) Heat shock No cracking UL 224 (4 hours at 250C/482F) Heat aging UL 224 (7 days at 158C/316F) Followed by tests for: Tensile strength MPa (psi) 70% minimum UL 224 of unaged specimens Ultimate elongation percent 100 minimum UL 224 Flexibility No cracking UL 224 Dielectric withstand seconds 60 minimum ASTM D 2671 at 2500 V Dielectric breakdown volts 50% minimum ASTM D 2671 of unaged specimens Dielectric strength kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671 Restricted shrinkage Pass UL 224 Electrical Dielectric withstand seconds 60 minimum ASTM D 2671 at 2500 V Dielectric strength kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671 14 Volume resistivity ohm-cm 10 minimum ASTM D 2671 Chemical Corrosive effect No corrosion ASTM D 2671 (7 days at 158C/316F) Copper stability No brittleness, glazing, ASTM D 2671 (7 days at 158C/316F) cracking, or severe discoloration of tubing. No pitting or blackening of copper. Followed by test for: Ultimate elongation percent 100 minimum ASTM D 2671 Flammability Pass UL 224, VW-1 Water absorption (recovered) percent 0.5 maximum ASTM D 2671 (24 hours at 23C/73F) Fungus resistance ISO 846 Method B Followed by tests for: Tensile strength MPa (psi) 10.3 (1500) minimum ASTM D 2671 Ultimate elongation percent 200 minimum ASTM D 2671 Dielectric strength kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671 Note: Consult RW-3023 for specific details about test procedures. Versafit and Raychem are trademarks of Tyco Electronics Corporation. Users should independently evaluate the suitability of the product for their application. Tyco Electronics Corporation 300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2 USA United Kingdom Japan Singapore 569507 Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151 Tel:+1 (650) 361-3860 (All other countries) All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporations only obligations are those in the Standard Terms and Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Tyco Electronics Corporations Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing without notification to the Buyer which do not affect compliance with any applicable specification. For more information about this product visit www.tycoelectronics.com 1995, 2002 Tyco Electronics Corporation Printed in USA 1654072 Revised 04/04