V42254A5235B215 TE Connectivity

8 7 6 5 4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 2011 LOC DIST REVISIONS ALL RIGHTS RESERVED. COPYRIGHT 2011 - C P LTR DESCRIPTION DATE DWN APVD GP 00 K REVISED PER ECO-15-007873 14JUL2015 AP SB COVER IN CLAMPED POSITION WITH COVER IN PRE-CLAMPED POSITION OPTIONAL STRAIN RELIEF ATTACHED 0 10.7 H MAX -0.1 3 MAX D D 23.3 22.6 20.1 MAX MAX MAX 1.5 MAX 1. CABLES TO BE USED: ALL COMMERCIALLY AVAILABLE RIBBON CABLE WITH PVC INSULATION AND TIN OR 1 0 SILVER PLATED COPPER WIRES. SEE WIRE INFORMATION IN TABLE BELOW. 6.13 -0.25 MAX 2. 9 POSITION VERSION SHOWN. USE ONLY WITH STRAIN RELIEF CLAMP. 3 OPTIONAL STRAIN RELIEF CLAMPS: 4 9 POSITION = 4-1393560-3 (V42254-A4000-D9) 15 POSITION = 4-1393560-5 (V42254-A4000-D15) 25 POSITION = 4-1393560-6 (V42254-A4000-D25) 37 POSITION = 4-1393560-7 (V42254-A4000-D37) 5. CONTACTS ARE STAMPED AND FORMED. PACKAGED IN BLISTER PACKS. 6 0 R2.6 +0 -0.16 7 PACKAGED ON REELS. B 0 12.6 -0.25 -0.76 +0.2 8. PLATING DETAILS: ALL MEET PERFORMANCE LEVEL 2 PER DIN 41652 P.2 AND P.4. 3 -0 UNDERPLATE: NICKEL OVER ENTIRE CONTACT C C CONTACT MATING SURFACE ALTERNATE 1: GOLD CONTACT MATING SURFACE ALTERNATE 2: GOLD FLASH OVER PALLADIUM-NICKEL IDC WIRE TERMINATION END: MATTE TIN SHELL PLATING: BRIGHT TIN OVER NICKEL 2.84 FLANGES WITH M3 (BLACK) OR 4-40 (BLUE) 9 SELF-LOCKING NUTS 1.15 0.1 TORQUE RETENTION 70 N-cm ALL CONTACTS 10 1 0 F 8 -0.25 C WIRE INFORMATION +0 A -0.76 OVERALL CONDUCTOR OVERALL CONDUCTOR PVC NO. OF SINGLE CROSS-SECTIONAL AREA DIAMETER AWG RANGE CONDUCTOR INSULATING STRANDED WIRES 2 2 SLEEVE DIA IN mm IN mm --- 30 0.25 1 SOLID 1.0/1.1 3 --- 28 0.32 1 SOLID 0.8/1.1 3 B B 0.09 28 --- 7 STRANDED 0.8/1.1 3 0.14 26 --- 7 STRANDED 0.8/1.1 NO Not Included 3.0 DIAMETER HOLE 39.52 24.79 33.30 +0.15/-0.1 2.74 27.26 15 V42254-A5237-B215 8-1393486-6 OBSOLETE YES Included 3.0 DIAMETER HOLE 69.70 54.96 63.50 0.13 2.76 57.44 37 V42254-A5235-W231 5-1393486-8 YES Included 3.0 DIAMETER HOLE 53.42 38.50 47.04 0.13 2.76 40.78 25 V42254-A5235-W230 5-1393486-7 YES Included 3.0 DIAMETER HOLE 39.52 24.79 33.30 +0.15/-0.1 2.74 27.26 15 V42254-A5235-W229 5-1393486-6 YES Included 3.0 DIAMETER HOLE 31.19 16.46 25.00 +0.12/-0.13 2.74 18.73 9 V42254-A5235-W228 5-1393486-5 OBSOLETE YES Not Included 3.0 DIAMETER HOLE 69.70 54.96 63.50 0.13 2.76 57.44 37 V42254-A5235-B237 3-1393486-7 YES Not Included 3.0 DIAMETER HOLE 53.42 38.50 47.04 0.13 2.76 40.78 25 V42254-A5235-B225 3-1393486-6 YES Not Included 6 3.0 DIAMETER HOLE 39.52 24.79 33.30 +0.15/-0.1 2.74 27.26 15 V42254-A5235-B215 3-1393486-5 YES Not Included 3.0 DIAMETER HOLE 31.19 16.46 25.00 +0.12/-0.13 2.74 18.73 9 V42254-A5235-B209 3-1393486-4 FLANGES WITH HOLES YES Not Included M3 SELF-LOCKING NUTS 31.19 16.46 25.00 +0.12/-0.13 2.74 18.73 9 V42254-A5234-B209 1393486-9 YES Not Included 4-40 SELF-LOCKING NUTS 69.70 54.96 63.50 0.13 2.76 57.44 37 V42254-A5232-B237 9-1393485-0 OBSOLETE YES Not Included 4-40 SELF-LOCKING NUTS 53.42 38.50 47.04 0.13 2.76 40.78 25 V42254-A5232-B225 8-1393485-9 YES Not Included 4-40 SELF-LOCKING NUTS 39.52 24.79 33.30 +0.15/-0.1 2.74 27.26 15 V42254-A5232-B215 8-1393485-8 YES Not Included 4-40 SELF-LOCKING NUTS 31.19 16.46 25.00 +0.12/-0.13 2.74 18.73 9 V42254-A5232-B209 8-1393485-7 OBSOLETE NO Not Included 3.0 DIAMETER HOLE 39.52 24.79 33.30 +0.15/-0.1 2.74 27.26 15 V42254-A4237-B215 8-1393485-3 7 TE FLANGE NO OF SIEMENS TE CONNECTIVITY A STRAIN RELIEF PKG A B C F H A MARKING OPTION POSITIONS PART NUMBER PART NUMBER DWN 06MAR2012 THIS DRAWING IS A CONTROLLED DOCUMENT. RAGHAVENDRA DIMENSIONING AND TOLERANCING TE Connectivity CHK 06MAR2012 PER ASME Y14.5M-2009 CARL ROHDE DIMENSIONS: TOLERANCES UNLESS M3 APVD NAME 9 OTHERWISE SPECIFIED: 06MAR2012 CARL ROHDE mm D-SUB IDC FEMALE CONNECTOR 4-40 UNC PRODUCT SPEC 0 PLC - - 1 PLC - - 2 PLC - - 3 PLC APPLICATION SPEC - SELF-LOCKING 3.7 MAX 4 PLC - SIZE CAGE CODE DRAWING NO RESTRICTED TO ANGLES - 1 NUT VERSION MATERIAL FINISH WEIGHT 00779 8-1393485-7 - - - - A1 - - SCALE SHEET OF REV CUSTOMER DRAWING 4:1 1 1 K 4805 (3/11)