VCS-06 TE Connectivity

te.com COMPACT VERTICAL LIQUID LEVEL SENSORS VCS Series High- or low-level switching N.O. or N.C. SPST output Can be mounted in the bottom or top of a tank Certified reed switch (UL component listed) Choice of several non-reactive wetted materials 18 different configurations available Features The VCS series of point liquid level switches demonstrates a high degree of reliability due to the use of non-reactive wetted Voltage rating up to 250VAC components and a unique reed switch designed specifically for Current rating up to 1.0 amp level sensing applications. The sensor utilizes a moving float with Compact design and low profile an embedded magnet to activate a reed switch located in the sensor stem. As the liquid level passes the sensor, the float Optional cable lengths moves up or down on the stem giving a normally closed or normally open switch indication. Applications The reliability of this sensor results from a very simple operating Water and fuel storage tanks principle, a single moving part, media compatible wetted materials, Full and/or empty detection and a unique reed switch design that has a UL recognized component certification. Pump on/off controls The sensor mounts into the top or bottom of a liquid storage tank Marine bilge and ballast tanks from the inside (internal fitting) using either a 1/8 NPT or M8 x Flood detection and prevention 1.25 threaded fitting. The output is a simple N.O. or N.C. SPST Coolant level indication reed switch that utilizes Ruthenium contact points for reliability. Changing from a N.O contact to a N.C. output is done by removing Livestock watering tanks the float, inverting it and re-attaching. This change can be done in Irrigation systems the field. Electrical outputs are a single pair of wires with PVC Water treatment plants insulation and optional lengths of 100 mm or 600 mm. Waste water tanks Chemical storage and processing CLICK HERE CONNECT WITH A SPECIALIST TE CONNECTIVITY SENSORS /// VCS SERIES 10/2020 Page 1 LIQUID LEVEL SWITCH VCS SERIES (1) Absolute Maximum Ratings Parameter Symbol Min Max Units Notes/Conditions 250 VAC Contact voltage Vcontact Do not exceed the 100 VDC maximum wattage rating for each model number Contact current Icontact 1.0 Amp Operating temperature 0 70 C Storage temperature -30 110 C Fitting pressure -1 4 Bar Internal tank pressure (1) Maximum limits the device will withstand without damage Material and Mounting Options Model Housing Stem Float Material Mounting Number Material VCS-01 VCS-02 VCS-03 VCS-04 VCS-05 VCS-06 VCS-07 VCS-08 VCS-13 VCS-14 TE CONNECTIVITY SENSORS /// VCS SERIES 10/2020 Page 2 Glass filled Polypropylene Glass filled Nylon 6.6 PVDF Foam Polypropylene Glass filled Polypropylene Glass filled Nylon 6.6 PPS 1/8 NPT M8 x 1.25