RT-1148 Page 1 of 8 Rev 9 RT-1148 Tyco Modified Fluoroelastomer Tubing Flexible, Abrasion Resistant, Heat-Shrinkable SCOPE: This specification covers the requirements for one type of highly flexible, electrical-insulating extruded tubing whose diameter will reduce to a predetermined size upon the application of heat in excess of 175C (347F). Approved Signatories* TE Connectivity : Approved electronically via DMTech * This document is electronically reviewed and approved - therefore no signatures will appear. If this document is printed it becomes uncontrolled. Check latest revision in DMTech on the nearest PC RT-1148 Page 2 of 8 Rev 9 1. Revision History Revision Number Change Request Date Incorporated by 9 Mar 2017 2. Applicable Documents This specification takes precedence over documents referenced herein. Unless otherwise specified, the latest issue of the referenced document applies. The following documents form a part of this specification to the extent specified herein. 2.1 Government Furnished Documents Military MIL-DTL-83133 Turbine Fuels, Aviation, Kerosene Types, Nato F-34 (JP-8), Nato F-35 and JP-8+100 SAE-AMS-1424 Anti-Icing and Deicing - Defrosting Fluid MIL-PRF-46170 Hydraulic Fluid, Rust Inhibited, Fire-resistant, Synthetic Hydrocarbon Base Federal A-A-59133 Commercial Item Description Cleaning Compound, High Pressure (Steam) Cleaner A-A-52557 Fuel Oil, Diesel for Posts, Camps and Stations 2.2 Other Publications American Society for Testing & Materials (ASTM) D 4814 Automotive Spark-Ignition Engine Fuel Std. Spec. for D 257 Standard Test Methods for D-C Resistance or Conductance of Insulating Materials D 2240 Test Method for Rubber Property -- Durometer Hardness D 2671 Method of Testing Heat-Shrinkable Tubing for Electrical Use G-21 Standard Recommended Practice for Determining Resistance to Synthetic Polymeric Materials to Fungi (Copies of ASTM publications may be obtained from the American Society for Testing & Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103.) 3.0 Requirements 3.1 Material The tubing shall be fabricated from thermally stabilized, modified fluoroelastomer and shall be crosslinked by irradiation. It shall be homogeneous and essentially free from flaws, defects, pinholes, bubbles, seams, cracks and inclusions. 3.2 Color The tubing shall be black. If this document is printed it becomes uncontrolled. Check latest revision in DMTech on the nearest PC