Catalog 1308242 Issued 3-03 AGASTAT VTMR1 series On-Delay Timing Module With Internal Potentiometer, Relay Output On-delay timing mode 8A SPDT relay output. Internal potentiometer for timing adjustment. Reliable solid state timing circuitry. Excellent transient protection. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data 25C On-Delay. Voltage: 10% 120VAC/VDC. Power Requirement: 3.5VA, max. Timing Specifications Transient Protection: Non-repetitive transients of the following magni- tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 15 to 300 sec. Timing Adjustment: Internal potentiometer. Operating Voltage <0.1 ms <1 ms Accuracy: Repeat Accuracy: 5% max. (0.25% typ.) 120 VAC/VDC 2,580V 2,150V* Overall Accuracy: Max. Time: 0%, +10%. * Min. source impedance of 100 ohms. Min. Time: 30%, +10%. Reset Time: 250 ms, max. Current Drain: 30mA, Max. Environmental Data Output Contact Data Temperature Range: Storage: -40C to +70C. Arrangement: 1 Form C (SPDT). Operating: -40C to +70C. Rating: 8A, resistive, at nominal operating voltage. Expected Mechanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations. Mechanical Data Mounting: Panel mount with one 8 screw. Termination: 0.250 in (6.35) quick connect terminals. Initial Dielectric Strength Weight: 4 oz. (112g) approximately. Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions and Wiring Diagram Ordering Information 2.00 Part Number Time Range Input Voltage (50.8) .763 OUTPUT RELAY (19.4) VTMR1AEA 15 to 300 sec. 120VAC .278 (7.06) OUTPUT RELAY .286 TIME (7.26) DELAY ADJUST 2.00 (50.8) INPUT VOLTAGE .885 .170 DIA (22.5) (4.32) .250 (6.35) X .032 (.813) ACCEPTS 1.25 QUICK CONNECTS (31.8) 8 SCREW Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1243 specified. Refer to inside back cover.