WOUV-125DC-AP TE Connectivity

Protective Relays 3 3 7/8 3 1/2 11/64 DIA. 4 MTG. HOLES Protective Relays WOUV DC Series, Over/Undervoltage Product Specifications Product Facts Nominal Voltage (10%) n ANSI/IEEE C37.90-1978 12 VDC to 560 VDC Drop-out Point (u/v models) 70-100% of nominal voltage, screwdriver adjustable Pick-Up Point (o/v models) The relay will energize at 13 100-125% of nominal voltage, 2 /16 normal voltage conditions. screwdriver adjustable The normally open contacts Output Contacts One set N.O., will close, and the normally One set N.C. closed contacts will open. Contact Ratings The relay will de-energize 5 amp resistive at 120 VAC or 28 VDC during over or undervoltage Operating Temperature Range conditions. Reset is auto- -40C to +75C matic when the voltage Temperature Effects returns to normal. Less than 1% voltage drift over the tem- perature range. Power Consumption 12 to 60 VDC models 1 W max. 120 to 305 VDC models 2 W max. 405 to 470 VDC models 3 W max. 560 VDC Model 4 W max. Note: Dimensions in inches. Multiply values by 25.4 for dimensions in mm. Time Delay A short duration delay is provided to prevent nuisance tripping due to momentary dips or surges in volt- 11 age. The drop-out delay, following a voltage fault is 75 to 100 milliseconds Notes: 1. Remove black screws for access to the O/V and U/V trip adjust- ment. 2. C lockwise rotation of the adjust- ment potentiometer will raise the Single Phase voltage trip point. 3. The adjustments are by means of a single turn potentiometer. Use a small screwdriver and do not force beyond the limit stops. Drop-Out Time Delay WOUV...DC Series Ordering Information 180 Sample Part Number WOUV -12DC -A 160 140 Type: 120 WOUV - Over/Undervoltage 100 Line Voltage VDC 80 12DC 125DC 60 18DC 240DC 24DC 250DC 40 28DC 305DC 20 32DC 405DC 0 48DC 430DC 020 40 60 80 100 120 140 60DC 470DC Time Delay (msec) 120DC 560DC Transient Protection All voltage Options: relays will withstand momentary voltage Blank - Standard surges of twice the nominal rated input A = 2 Form A Contacts voltage (standard). B = 2 Form B Contacts Option P provides additional tran- H = 125 VDC Contacts sient protection which complies with the P = Transient Protection requirements of ANSI/IEEE C37.90-1978 Consult factory for additional models. 1115 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. 2.0 TERMINAL STRIPS 6 - 32 SCREWS 2 3/4 3 1/2 Percent of Nominal Voltage