Arbitrary/Function Generator AFG1000 Series Datasheet Compatible with TekSmartLab for easy teaching and learning Standard 5-year warranty Applications Electric and electronics experiments Communications experiments Sensor simulation Functional test Performance and features 1 Hz to 25 MHz or 60 MHz sine waveform range, with 12-digit or 1 Hz resolution and a 1 ppm drift high stability time base, provides great signal fidelity in the frequency domain. With 1 mV to 10 V output amplitude p-p p-p The AFG1000 Series Arbitrary Function Generator provides a waveform range, and 14-bit or 1 mV resolution over the whole frequency range, p-p generation tool with the best price performance ratio. It includes two models there is no need to compromise between output amplitude and frequency with dual channels, up to 60 MHz bandwidth and up to 10 V output p-p any more. amplitude. The four run modes, 50 built-in frequently-used waveforms and the built-in 200 MHz frequency counter cover most waveform generation Four different run modes cover most use cases with a cost effective needs in your experiment and test jobs. The 3.95-inch TFT LCD, short-cut solution. 50 most-frequently used standard and arbitrary waveforms are buttons, USB interface and PC software provide the most intuitive ways to built-in for easy access. Up to 1 M points arbitrary waveforms memory configure the instrument. enables users to replicate real world signals captured with a Tektronix oscilloscope or defined with ArbExpress. The built-in 200 MHz and 6-digit resolution frequency counter is an easy and precise way to measure Key performance specifications frequencies/periods/pulse widths/duty cycles. Dual-channel, 25 MHz or 60 MHz sine waveforms, 12.5 MHz or 30 MHz square waveforms Ease of use 14 bits, 125 MS/s or 300 MS/s arbitrary waveforms with 8 k points or 1 M points record length The high-resolution 3.95-inch color TFT display shows relevant settings and parameters in both text and graphic formats, which give users full Amplitude 1 mV to 10 V into 50 loads p-p p-p confidence in their settings, and let them focus on the task at hand. The front panel shortcut buttons and rotary knob make accesses to most Key features frequently used functions and settings with minimum effort and time. The built-in 64-MByte non-volatile memory together with USB stick memory Continuous, sweeping, burst, and modulation modes (AM, FM, PM, interface, provide unlimited space for user-defined waveform storage. ASK, FSK, PSK, PWM) covers most requirements for students and other users to get the experiments/test job done 64-MByte internal non-volatile memory for arbitrary waveform storage Software and solutions Built-in 200 MHz counter with 6-digit resolution offers an easy and The user-defined arbitrary waveforms generated by the free ArbExpress precise way of frequency/period/pulse width/duty cycle measurement software can easily be loaded on the AFG1000 with a USB memory stick. Standard USB host/device for memory expansion and remote control As a building block of Tektronix educational solution, the AFG1000 can be embedded into TekSmartLab and enable a cost efficient and effective way Free ArbExpress makes user defined waveforms editing extremely of teaching, learning, and lab management. easy through an external USB memory stick www.tek.com 1Datasheet Specifications All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise. Channels Number of channels 2 Built-in waveforms Built-in waveforms Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms General characteristics Sine waves AFG1022 AFG1062 Range 1 Hz to 25 MHz 1 Hz to 60 MHz Sine wave in burst mode 2 mHz to 25 MHz 2 mHz to 30 MHz Effective maximum frequency 25 MHz 60 MHz out Amplitude flatness (1 V ), p-p typical <10 MHz 0.4 dB 0.5 dB 10 MHz and 25 MHz 0.7 dB 10 MHz and 60 MHz 0.9 dB Harmonic distortion (1 V ) p-p 10 MHz < -50 dBc < -60 dBc >10 MHz < -50 dBc < -47 dBc Total harmonic distortion < 0.2% (10 Hz to 20 kHz, 1 V ) p-p Spurious (1 V ), typical p-p < -45 dBc Phase noise, typical 1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 V p-p Residual clock noise, typical -57 dBm Square wave AFG1022 AFG1062 Range 1 Hz to 12.5 MHz 1 Hz to 30 MHz Rise/fall time, typical <12 ns <10 ns Jitter (rms), typical <1 ns <500 ps Overshoot <5% 2 www.tek.com