50 H LISN for Tektronix EMC pre-compliance EMI-LISN50UH (TEKBOX TBLC08 offered by Tektronix) Artificial hand: 220 pF + 511 Switchable PE: 50 50 H Limiter / attenuator: 150 kHz to 30 MHz 10 dB Air core inductors Line voltage: max. 240V / 50 60 Hz, CAT Max. current: 8A 23C DUT socket: country specific The EMI-LISN50UH is the TEKBOX TBLC08 50H Line Impedance Measurement connector: 50 BNC Stabilization Network (LISN) for the measurement of line-conducted interference within the range of 9 kHz to 30 MHz, according to the Power connector: IEC 60320 C13 CISPR16 standard. The device is designed for testing single phase, AC- Operating Temperature Range: +5C + 40C 5% to 80% RH powered equipment with supply voltages up to maximum 260 V. Conducted noise can be measured on the phase and on the neutral conductor. The Safety Class I, IEC 1010-01 TBLC08 is equipped with a switchable limiter/attenuator and an artificial hand connection. Three models are available with country-specific DUT Applications connectors. EMC pre-compliance testing of conducted noise Key features Frequency range: 9 kHz to 30 MHz Impedance: 50 (50 H + 5 ) www.tek.com 1Datasheet Specifications 50 H LISN Frequency range 9 kHz 30 MHz Impedance 50 (50 H + 5 ) Artificial hand 220 pF + 511 Switchable PE 50 50 H Limiter / attenuator 150 kHz to 30 MHz 10 dB Line voltage Maximum 240 V / 50-60 Hz, CAT II20 pF + 511 Maximum current 8 A at 23C Fuses: 8A, slow DUT socket Country specific (EU, US, GB options available) Measurement connector 50 BNC Power connector IEC 60320 C13 Operating temperature range +5C + 40C 5% to 80% RH Safety Class I, IEC 1010-01 2 www.tek.com