400-192-10 Teledyne

Series 172 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID COMMERCIAL RELAYS DPDT SERIES RELAY TYPE 172 DPDT basic relay 172D DPDT relay with internal diode for coil transient suppression DESCRIPTION The 172 Centigrid relay is an ultraminiature, hermetically sealed, High force/mass ratios for resistance to shock and vibration. armature relay for commercial applications. Its low profile height (.280) Advanced cleaning techniques provide maximum assurance of and .100 grid spaced terminals, which preclude the need for spreader pads, internal cleanliness. make it an ideal choice where extreme packaging density and/or close PC Precious metal alloy contact material with gold plating assures excellent board spacing are required. high current and dry circuit switching capabilities. The basic operating concept and internal structure are similar to The Series 172 relay has an internal discrete silicon diode for coil transient Teledynes DPDT 114 Centigrid relay. Unique construction features and suppression. manufacturing techniques provide overall high reliability and excellent resistance to environmental extremes: By virtue of its inherently low intercontact capacitance and contact circuit losses, the 172 relay is an excellent subminiature RF switch for The 172 feature: frequencies well into the UHF spectrum (see Figure 1). Applications include telecommunications, test instruments, mobile communications, All welded construction. attenuators, and automatic test equipment. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity. Part Numbering System 172 Z M4 - 26 / S Q 1 Q = Solder-Coated Leads Relay Series G = Gold-Plated Leads (RoHS Compliant) 2 R = RoHS Compliant Solder Ground Pin Option (See Appendix) S = 0.187 Leads Pad Option No Suf x = 0.75 Leads (See Appendix) Nominal Coil Voltage (26 = 26.5 V, See Page 2 for more Voltages) ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS INTERNAL CONSTRUCTION Temperature 65C to +125C (Ambient) Vibration 10 gs to 500 Hz (General Note I) Shock 30 gs, (General Note I) 6ms half sine Enclosure Hermetically sealed Weight 0.15 oz. (4.3g) max. 2019 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com 172 Page 1 172 112019 Q4Series 172 DPDT Non-Latching Commercial Electromechanical Relay SERIES 172 GENERAL ELECTRICAL SPECIFICATIONS ( 25C) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.15 max. Resistive: 1 A/ 28 Vdc Inductive: 200 mA/ 28 Vdc (320mH) Contact Load Rating Lamp: 100 mA / 28 Vdc (320mH) Low level: 10 to 50 A 10 to 50 mV 5,000,000 cycles (typical) at low level Contact Life Ratings 500,000 cycles (typical) at 0.5 A / 28 Vdc resistive 100,000 cycles min. at all other loads speci ed above Contact Overload Rating 2 A / 28 Vdc Resistive (100 cycles min.) Contact Carry Rating Contact Factory Operate Time 6.0 msec max. at nominal rated coil voltage Release Time 172: 3.0 ms max. 172D: 6.0 ms max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 1,000 M min. between mutually isolated terminals Dielectric Strength 300 Vrms (60 Hz) atmospheric pressure Negative Coil Transient (Vdc) 2.0 Vdc Max. Diode P.I.V. (Vdc) 60 Vdc Min. DETAILED ELECTRICAL SPECIFICATIONS ( 25C) 172-5 172-12 172-26 BASE PART NUMBERS (172, 172D) 172D-5 172D-12 172D-26 Nom. 5.0 12.0 26.5 Coil Voltage Max. 5.8 16.0 32.0 Coil Resistance (Ohms 20%) 64 400 1600 Pick-up Voltage (Vdc, Max.) Pulse Operation 3.8 9.0 18.0 Coil Operating Power at Nominal Voltage (mW) 405 360 440 172 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE RELAYS 172 112019 Q4