Series CCR-33S/CR-33S Miniature DC18 GHz/DC-22 GHz COAX SWITCHES Latching SPDT Coaxial Switch PART NUMBER DESCRIPTION CCR-33S Commercial Latching SPDT, DC-18GHz CR-33S Elite Latching SPDT, DC-22GHz Available with The CCR-33S/CR-33S is a broadband, SPDT, electromechanical, coaxial switch designed to switch USB & Ethernet Control a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The small switches incorporate SMA connectors. The CCR-33S/CR-33S series switch is offered with a latching actuator. This design is compatible with the two most common mounting hole patterns. The CCR-33S/CR-33S series switch is interchangeable with a variety of switches. ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Operating Temperature Form Factor SPDT, Commercial Model, CCR-33S 25C to 65C break before make Elite Model, CR-33S*** 55C to 85C Frequency Range Vibration (MIL-STD-202 Method 214, 10 gs RMS CCR-33S DC18 GHz Condition D, non-operating) CR-33S DC22 GHz Shock (MIL-STD-202 Method 213, 500 gs Characteristic Impedance 50 Ohms Condition D, non-operating) Operate Time 10 ms (max.) Standard Actuator Life 5,000,000 cycles Actuation Voltage Available 12 15 24 28 V Actuator Life w/ Additional Features 1,000,000 cycles Actuation Current, max. ambient 140 170 90 65 mA Connector Type SMA Humidity (Moisture Seal) Available Weight 1.65 oz. (46.78g) (max.) TYPICAL PERFORMANCE CHARACTERISTICS Frequency DC3 GHz 36 GHz 612 GHz 1218 GHz 18-20 GHz 20-22 GHz Insertion Loss, dB, max. 0.2 0.2 0.4 0.5 0.6 0.6 Isolation, dB, min. 70 70 60 60 50 50 VSWR , max. 1.25:1 1.25:1 1.4:1 1.5:1 1.6:1 1.6:1 For maximum limits, please see charts on page 3-5 PART NUMBERING SYSTEM CCR-33 S 6 C - T ** Series Options Connectors Actuator Type Actuator Voltage Connector Actuator Voltage Actuator Type Options S: SMA Female 6: 28 Vdc Latching 0: Standard Contacts T: TTL Drivers with Diodes 7: 15 Vdc Latching C: Indicator Contacts*** D: Transient Suppression 8: 12 Vdc Latching D: Self Cutoff Only Diodes 9: 24 Vdc Latching E: Indicators and Self Cutoff*** R: Positive + Common N: Narrow Body **SEE PARTS LIST ON PAGES 8-9 M: Moisture Seal S: 9 Pin D-Sub Connector *** Indicator Contacts Operating Temperature For other options, contact factory. -50C to 85C (Elite Model Only) 2019 TELEDYNE RELAYS (800) 284-7007 www.teledynecoax.com CCR-33S/CR-33S Page 1 CCR-33S CR-33S 022019 Q1Series CCR-33S/CR-33S Miniature DC18 GHz/DC-22 GHz COAX SWITCHES Latching SPDT Coaxial Switch SCHEMATICS AND MECHANICAL OUTLINE Indicators TTL Analog 2X SOLDER TERMINALS 2X SOLDER TERMINALS SOLDER WIRE MAXIMUM SOLDER WIRE MAXIMUM TEMP 250C FOR NO TEMP 250C FOR NO MORE THAN 5 SEC MORE THAN 5 SEC Indicators TTL Analog 2X SOLDER TERMINALS 2X SOLDER TERMINALS SOLDER WIRE MAXIMUM SOLDER WIRE MAXIMUM TEMP 250C FOR NO TEMP 250C FOR NO MORE THAN 5 SEC MORE THAN 5 SEC (1.80 MAX with ttL) (1.80 MAX with ttL) H = 1.30 MAX. STD MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.80 MAX. TTL MODEL H = 1.30 MAX. STD MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.80 MAX. TTL MODEL Optional Narrow Width Body Standard Width Body 1 Optional Narrow Width Body Standard Width Body 6 P/N 2706650 -s option 9-pin d -sub orconnect (example : ccr -33s 60-s ) 9 PIN D-SUB PINOUT FOR LATCHING SPDT TRUTH TABLE (with TTL option) OPTIONS Indicator Logic Input RF Path Pin Indicators & (if applicable) Basic Indicators TTL No. TTL 1 1 2 IN IN A B 1 1 1 9 to 1 to 2 2 2 2 0 0 No Change 3 C C Common Common P/N 2707572 1 0 On Off C 0 4 1 1 5 2 2 0 1 Off On 0 C 6 Vsw Vsw 1 1 Forbidden 7 A A 8 B B 1 5 6 10 9 C C 11 15 CCR-33S/CR-33S Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE COAX SWITCHES AMPHENOL P/N P-17EHD-015P CCR-33S CR-33S 022019 Q1