CCR-59S86O-T Teledyne

Positions Standard SMA Connectors Commercial CCR-59 Multi-Throw DC-26.5GHz Latching The CCR-59 Switch is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave signal from a common input to any of 3, 4, 5, or 6 outputs. The characteristic impedance is 50 Ohms. The switches are small using the popular connector spacing on a 1.062 dia. circle. Each position has an individual actuator mechanism allowing random position selection. This also minimizes switching time. The CCR-59 comes with a latching actuator. The latching switch remains in the last position selected when the switch is de-energized. Specifications STD dual command requires a reset pulse before a new selected RF Contacts: Break before make position. A separate reset circuit allows all positions to be set to an O open position. User must provide both reset (clear) and set (select Actuator Voltage (VDC) 20 C 12 15 28 new position) commands. Latching Current (mA) 255 205 90 Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating) Reset Current (mA) 3 765 615 270 Vibration: MIL-STD-202 Method 214, Condition D (10G 4 1020 820 360 RMS Non Operating) 5 1275 1025 450 Humidity: Moisture Seal Available 6 1530 1230 540 Typical Contact Life: 5 Million Cycles Switching Time: 20 msec max Insertion Loss Repeatability (1 Million Cycles): Connectors: SMA (f) DC to 6 GHz: 0.05 dB Weight: 6 oz. max DC to 20 GHz: 0.1 dB O O Temperature Range: -40 C to +65 C (Operating) RF Power Handling Typical Performance 3000 800 400 15 200 25 80 40 26.5 0.01 Frequency GHz 10 0.1 1.0 4.0 10 18 26.5 0.0 Frequency GHz 0.4 60 Specifications DC-6 GHz 6-12 GHz 12-18 GHz 18-26.5 GHz 70 VSWR (max) 1.25:1 1.40:1 1.50:1 1.80:1 80 Insertion Loss (max) 0.20 dB 0.40 dB 0.50 dB 0.80 dB Isolation (min) 70.0 dB 60.0 dB 60.0 dB 50.0 dB 90 0.01 26.5 Frequency GHz Specifications subject to change without notice. www.teledynecoax.com email: coax teledyne.com Tel: (800) 351-7368 10/2007 Power CW (Watts) Return Loss IL dB Isolation dBCommercial CCR-59 Multi-Throw DC-26.5GHz Latching Analog TTL Indicators SP3T SP5T SP6T H = 2.25 STD Model SP4T H = 2.50 TTL Model Part Numbering System for CCR-59 (Latching) CCR-59 S 6 5 O - T Series Options Connectors Actuator Type Actuator Voltage Number of Switch Positions Connector Actuator Voltage Number of Actuator Type Options S: SMA Female 6: 28Vdc Latching Positions O: No Indicator Contacts T: TTL Drivers with Diodes 7: 15Vdc Latching 3: SP3T C: Indicator Contacts R: Positive + Common 8: 12Vdc Latching 4: SP4T TD: TTL Driver with Decoder 5: SP5T For other options contact Factory 6: SP6T Specifications subject to change without notice. www.teledynecoax.com email: coax teledyne.com Tel: (800) 351-7368 10/2007