DX10-SI Teledyne

WaveLink Differential Probe System (4 GHz6 GHz) Key Features 4 GHz or 6 GHz models The WaveLink Differential Probe Series is a 4-6 GHz bandwidth active Up to 5 Vpk-pk dynamic range with differential probe series with the widest range of tips, large offset low noise capability, and high dynamic range. 3 V offset range Ideal for DDR2, LPDDR2, DDR3 General Purpose Probe with Exceptional Waveform Fidelity Range of Capabilities WaveLink probes provide superior Innovative QuickLink architecture Teledyne LeCroys WaveLink 4-6 GHz loading characteristics and are Wide variety of tips and leads Differential Probes are a general calibrated with a custom fine- Solder-In Lead purpose probing solution with high- tuned frequency response. The QuickLink Solder-In Lead input dynamic range and offset range ultra-low loading coupled with a flat Positioner (Browser) Tip capability. The range of capabilities is frequency response ensure accurate Adjustable (Browser) Tip ideal for a variety of high-speed DDR measurements. Quick Connect Lead signals where high dynamic range and Square Pin Lead Unique QuickLink Architecture Hi-Temp Solder-In Lead large offset requirements are common. The unique QuickLink architecture Low loading and high impedance for Wide Variety of Tip and Leads allows for probe tips to be quickly minimal signal disturbance The wide variety of tips offered with attached or removed to a WaveLink Deluxe soft carrying case the D4x0/D6x0 provides confidence differential amplifier. Unlike other that the most challenging test points consumable probe tip solutions which can be probed. With seven different rely on tiny, delicate tips located very tips available, the D4x0/D6x0 provides close to the Device Under Test (DUT), great flexibility when probing, while the QuickLink Solder-In tip has an maintaining signal integrity. An integral 9-inch lead. QuickLink Solder- assortment of hands-free probe holders In tips are low cost, making it easy to eases the challenge of connecting equip multiple test points and DUTs and multiple leads to a board. eliminating time-consuming resoldering of connectors.EXCEPTIONAL WAVEFORM FIDELITY The D4x0/D6x0 probe series has superior electrical In addition to their electrical performance, WaveLink probes characteristics, providing excellent signal fidelity. These have the best-in-class mechanical design for optimum probes were designed with low loading and high impedance utility. The D4x0/D6x0 probes series includes seven for minimal signal disturbance and circuit loading. WaveLink different interconnect configurations allowing for flexibility probes use a unique calibration process where each probe when making measurements. Additionally, WaveLink probes is programmed with a custom fine-tuned frequency offer a variety of hands free positioners to offer stable and response which is read by the oscilloscope in order to accurate probe tip placement to make perfect contact digitally compensate for the entire system response. without the worry of hand probing errors. 2