SERIES CENTIGRID 114 ESTABLISHED RELIABILITY RELAYS DPDT SERIES RELAY TYPE DESIGNATION 114 DPDT basic relay 114D DPDT relay with internal diode for coil transient suppression DPDT relay with internal diodes for coil transient suppression and polarity 114DD reversal protection INTERNAL CONSTRUCTION DESCRIPTION The Series 114 Centigrid relay is an ultraminiature, hermetically sealed, armature relay. Its low profile height (.275 ) and .100 grid spaced terminals, UNI-FRAME which precludes the need for spreader pads, make it ideal for applications UPPER STATIONARY where extreme packaging density and/or close PC board spacing are required. CONTACT The basic design and internal construction are similar to the standard ARMATURE Teledyne DPDT TO-5 relay (e.g., Series 412). The following unique construction features and manufacturing techniques provide overall high reliability and excellent resistance to environmental extremes: LOWER All welded construction. STATIONARY CONTACT Unique uni-frame design providing high magnetic efficiency and mechanical MOVING CONTACT rigidity. High force/mass ratios for resistance to shock and vibration. Advanced cleaning techniques provide maximum assurance of internal cleanliness. Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities. ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS The Series 114D and 114DD relays have internal discrete silicon diodes for Temperature coil suppression and polarity reversal protection. 65C to +125C (Ambient) By virtue of its inherently low intercontact capacitance and contact circuit Vibration 30 gs to 3000 Hz (General Note 1) losses, the 114 relay has proven to be an excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for Shock 75 gs, (General Note 1) 6 msec, half-sine the 114 relay is in handheld radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high Acceleration 50 gs reliability make it a preferred method of Transmit-Receive Enclosure Hermetically sealed switching (see Figure 1). Weight 0.09 oz. (2.55g) max. 2006 TELEDYNE RELAYS SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 114 Page 1 www.teledynerelays.com 114/0706/Q1INSERTION LOSS SERIES 114 GENERAL ELECTRICAL SPECIFICATIONS (65C to +125C unless otherwise noted) (Notes 2 & 3) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.1 ohm max. before life 0.2 ohm max. after life at 1A/28Vdc (measured 1/8 from header) Resistive: 1 Amp/28Vdc Contact Load Ratings (DC) Inductive: 200 mA/28Vdc (320 mH) (See Fig. 2 for other DC Lamp: 100 mA/28Vdc resistive voltage/current ratings) Low Level: 10 to 50 A/10 to 50mV Resistive: 250 mA/115Vac, 60 and 400 Hz (Case not grounded) Contact Load Ratings (AC) 100 mA/115Vac, 60 and 400 Hz (Case grounded) 10,000,000 cycles (typical) at low level Contact Life Ratings 1,000,000 cycles (typical) at 0.5A/28Vdc resistive 100,000 cycles min. at all other loads specified above Contact Overload Rating 2A/28Vdc Resistive (100 cycles min.) Contact Carry Rating Contact factory Operate Time 2.0 msec max. at nominal rated coil voltage Release Time 114 Series: 1.5 msec max. 114D, 114DD Series: 4.0 msec max. Contact Bounce 1.5 msec max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 10,000 megohms min. between mutually isolated terminals Dielectric Strength Atmospheric pressure: 500 Vrms/60Hz 70,000 ft.: 125 Vrms/60Hz Negative Coil Transient (Vdc) 114D, 114DD 1.0 max Diode P.I.V. (Vdc) 114D, 114DD 100 min. DETAILED ELECTRICAL SPECIFICATIONS (65C to +125C unless otherwise noted) (Note 3) 114-5 114-6 114-9 114-12 114-18 114-26 BASE PART NUMBERS 114D-5 114D-6 114D-9 114D-12 114D-18 114D-26 (See Note 8 for full P/N example) 114DD-5 114DD-6 114DD-9 114DD-12 114DD-18 114DD-26 Nom. 5.0 6.0 9.0 12.0 18.0 26.5 Coil Voltage (Vdc) Max. 5.8 8.0 12.0 16.0 24.0 32.0 114, 114D 50 98 220 390 880 1560 Coil Resistance (Ohms 10% 25C) 114DD (Note 4) 39 78 220 390 880 1560 Min. 93.2 58.3 33.0 25.6 17.5 14.8 Coil Current (mAdc 25C) (114DD Series) Max. 128.2 78.3 42.9 32.8 22.1 18.5 114, 114D 3.5 4.5 6.8 9.0 13.5 18.0 Pick-up Voltage (Vdc, Max.) 114DD 4.0 5.0 7.8 10.0 14.5 19.0 Min. 0.14 0.18 0.35 0.41 0.59 0.89 114, 114D Max. 2.3 3.2 4.9 6.5 10.0 13.0 Drop-out Voltage (Vdc) Min. 0.6 0.7 0.8 0.9 1.1 1.4 114DD Max. 2.8 3.4 5.3 6.5 10.0 13.0 PERFORMANCE CURVES (NOTE 2) TYPICAL RF PERFORMANCE TYPICAL DC CONTACT RATING (RESISTIVE) 0 .1 300 .2 .3 250 .4 200 10 1.92 20 1.22 150 30 1.07 100 40 1.02 50 1.01 50 60 1.00 70 1.00 .01 0.5 .1 .5 1.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 LOAD CURRENT (AMPS DC) FREQUENCY (GHz) FIGURE 1 FIGURE 2 114 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2006 TELEDYNE RELAYS www.teledynerelays.com 114/0706/Q1 RETURN LOSS (VSWR) ISOLATION ACROSS POLES ISOLATION ACROSS CONTACTS dB VSWR LOAD VOLTAGE (VDC)