LR600240R25 Teledyne

LR Series DIP SSR Ratings to 40A 480 V AC with external heat sink SCR output for heavy industrial loads AC or DC control Zero-crossing (resistive loads) or random-fire (inductive loads) output Optional Mounting Clip Available (LMC-1) PRODUCT SELECTION Control Voltage 25A 40A 25A 40A 90-140 VAC LR600240A25 LR600240A40 LR1200480A25 LR1200480A40 180-260 VAC LR600240A25 LR600240A40 LR1200480A25 LR1200480A40 4-32 VDC LR600240D25 LR600240D40 LR1200480D25 LR1200480D40 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description 25A 40A 25A 40A Operating Voltage (47-63Hz) Vrms 24-280 24-280 48-530 48-530 Transient Overvoltage Vpk 600 600 1200 1200 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 0.1 0.1 0.1 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 500 500 500 500 Maximum Load Current Arms 25 40 25 40 Minimum Load Current Arms 0.15 0.15 0.15 0.15 Maximum Surge Current Non-Repetitive(16.6ms) Apk 250 400 250 400 Maximum On-State Voltage Drop Rated Current Vpk 1.6 1.6 1.6 1.6 Maximum I t for fusing (8.3 msec) A sec 260 660 260 660 Maximum Thermal Resistance Junction to Ceramic Base 0.9C/W 0.7C/W 0.9C/W 0.7C/W Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5INPUT SPECIFICATIONS (1) Description No Suffix -120 -240 Control Voltage Range 4-32 VDC 90-140 V 180-260 V Must Turn On Voltage 4.0 VDC 90 VAC 180 VAC Must Turn Off Voltage 1.0 VDC 10 VAC 10 VAC Typical Input Current (5)(6) 9 mAdc 15 11 Maximum Turn-On Time msec (4) 1/2 Cycle 10.0 10.0 Maximum Turn-Off Time msec 1/2 Cycle 40.0 40.0 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 8.0 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125C Weight (typical) 0.5 oz. (14.4g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25C and per section unless otherwise specified. 2) Dielectric and insulation resistance are measured between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 4) Turn-on time for random Switching models is 0.1 ms. 5) DC Input circuitry incorporates active current limiter. 6) Use suffix-120 for 120 VAC control and -240 for 240VAC control MECHANICAL SPECIFICATIONS