Series RF300 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES RELAY TYPE RF300 Repeatable, RF relay DESCRIPTION The following unique construction features and The ultraminiature RF300 relays are designed to manufacturing techniques provide excellent provide improved RF signal switching repeatability robustness to environmental extremes and overall over the frequency range. These relays are engineered high reliability: for use in RF attenuator, RF switch matrices, ATE Uniframe motor design provides high magnetic and other applications that require dependable high efficiency and mechanical rigidity frequency signal fidelity and performance. Minimum mass components and welded construction provide maximum resistance to shock The RF300 features: and vibration High repeatability Advanced cleaning techniques provide maximum Broader bandwidth assurance of internal cleanliness Metal enclosure for EMI shielding Hermetically sealed High isolation between control and signal paths Solder Dipped Leads, (RoHS compliant solder High resistance to ESD option available) ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Storage 65C to +125C Temperature (Ambient) Operating 55C to +85C Vibration 10 gs to 500 Hz (General Note I) Shock 30 gs, (General Note I) 6ms half sine Enclosure Hermetically sealed Weight RF300 0.09 oz. (2.55g) max. 2019 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com RF300 Page 1 RF300 112019 Q4Series RF300 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps SERIES RF300 TYPICAL RF CHARACTERISTICS (See RF Notes) Isolation Across Contacts (RF Note 4) Isolation Pole to Pole (RF Note 5) Insertion Loss (RF Note 6) VSWR (RF Note 6) RF300 Time Response (RF Note 6) RF NOTES 1. Test conditions: a. Fixture: .031 copper clad, reinforced PTFE, RT/duroid 6002 with SMA connectors. (RT/duroid is a registered trademark of Rogers Corporation.) b. Room ambient temperature. c. Terminals not tested were terminated with 50-ohm load. d. Contact signal level: 10 dBm. e. No. of test samples: 4. 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. 3. Data is per pole, except for pole-to-pole data. 4. Data is the average from readings taken on all open contacts. 5. Data is the average from readings taken on poles with coil energized and de-energized. 6. Data is the average from readings taken on all closed contacts. 7. Test fixture effect de-embedded from frequency and time response data. RF300 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE RELAYS RF300 112019 Q4