RP4030 Active Voltage Rail Probe Key Features 4 GHz Bandwidth The RP4030 is designed specifically to probe a 50 DC power/voltage 30V Offset Capability rail. The probe has large built-in offset, low attenuation (noise), and 800mV Dynamic Range high DC input impedance. Built-in offset and low attenuation permit the power/voltage rail to be offset in the oscilloscope by its mean DC 50 k DC Input Impedance voltage with high oscilloscope gain (sensitivity) to achieve a noise-free 1.2x Attenuation view of small signal variations. The high DC input impedance eliminates (Low Additive Noise, ~5%) loading of the DC rail. MCX terminated cable with wide Large Offset Range 4 GHz of Bandwidth variety of connections: Permits the DC signal to be Provides maximum bandwidth Solder-in (4 GHz) displayed in the vertical center of the for probing near the CPU, and the Coaxial Cable to oscilloscope grid with a high-sensitivity perfect match with the 4 GHz, 10 bit U.FL receptacle (3 GHz) gain setting. HDO9404 when making power integrity MCX PCB Mount (4 GHz) measurements. Low Attenuation and Noise Browser (350 MHz) The probe attenuation is a nominal Wide Assortment of ProBus Interface Tips and Leads 1.2x coupled to the oscilloscope at The RP4030 is supplied standard with DC50 . This keeps additive noise to a solder-in and coaxial cables with MCX minimum, and makes it exceptionally and U.FL PCB receptacle mounts. A useful with High Definition browser tip is optionally available. oscilloscopes for lowest noise at Additional receptacles or leads may highest sensitivity gain settings. be purchased as accessories and High DC Input Impedance left connected in circuit for easy 50 k input impedance at DC connection of different signals during effectively eliminates probe loading on different test or validation stages. the DC power/voltage rail and provides for more accurate measurements and signal fidelity.SPECIFICATIONS & ORDERING INFORMATION Specifications Ordering Information Electrical Characteristics Product Description Product Code Bandwidth 4 GHz (guaranteed, MCX receptacle) Power/Voltage Rail Probe RP4030 4 GHz (typical, solder-in lead) 4 GHz, 1.2x, 30V offset, 800mV dynamic range 3 GHz (typical, U.FL cable + Includes Qty. 1 ProBus compatible probe offset amplifier with 50 k DC receptacle) input impedance and SMA input connection for provided 0.9m SMA to 350 MHz (typical, browser) MCX extension cable. Also supplied are Qty. 3 MCX solder-in leads, Qty. Rise Time (10-90%) 110 ps (typical, MCX receptacle or 3 MCX PCB Mounts, Qty. 3 MCX to U.FL coaxial cables, Qty. 5 U.FL PCB solder-in lead) Mounts, Qty. 1 MCX to SMA adapter, and soft carrying case. Browser tip Input Capacitance 0.1 uF (in series with 50) sold separately. DC Input Resistance 50 k 350 MHz Browser Tip Accessory RP4000-BROWSER Offset Range 30V Includes 0 (1x), 450 (10x) and 950 (20x) tips. Attenuation 1.2x Input Dynamic Range 800 mV Non-destruct Voltage 50V Noise ~5% additive to oscilloscope noise Oscilloscope Termination DC 50 Environmental Operating Temperature Range 0 to 50 C Non-operating Temperature Range -40 to +70 C Humidity 5% to 80% RH (non-condensing) up to 30 C, decreasing linearly to to 45% RH at 50 C Operating Altitude 3000 meters maximum Physical RP4030 Probe: 38.1 mm W x 15.9mm H x 73mm L (1-1/2 x 5/8 x 2-7/8) SMA to MCX Cable: 914mm L (36) MCX to Solder-in Lead: 191mm (7- Accessories and Consumables 1/2) usable length Qty. 3 MCX 4 GHz solder-in leads RP4000-MCX-LEAD-SI MCX to U.FL Plug Coaxial Cable: 102mm (4) usable length Qty. 10 MCX PCB mount receptacle RP4000-MCX-PCBMOUNT RP4000-BROWSER 11.9mm W x 9.5mm H x 38mm L Qty. 3 MCX to U.FL 3 GHz ultra-mini RP4000-MCX-CABLE-UFL (15/32 x 3/8 x 1-1/2) coax cable SMA to SMA Cable: 1m (39-3/8) Qty. 10 U.FL PCB mount receptacles RP4000-UFL-PCBMOUNT usable length Other Oscilloscope Interface Teledyne LeCroy ProBus Software Requirements Teledyne LeCroy MAUI 8.2.1.1 or higher Weight 119 g (0.26 lb) Customer Service Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes: No charge for return shipping Long-term 7-year support Upgrade to latest software at no charge 1-800-5-LeCroy Local sales offices are located throughout the world. teledynelecroy.com Visit our website to nd fi the most convenient location. 2016 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. rp4030-probe-ds-01nov16 Product or brand names are trademarks or requested trademarks of their respective holders.