SH20DC40-16 Teledyne

NEW Series SHDC Output to 60A, 200 Vdc High Industrial Performance (HIPpak) DC Solid-State Relays FEATURES/BENEFITS Latest generation MOSFET technology Ultra low on-state resistance Low output leakage current Built-in overvoltage protection Reverse protected triggered control input to avoid linear control risks No radiated or conducted disturbances IP20 touch-proof fl aps IP20 touch-proof fl aps Part Number Description MECHANICAL SPECIFICATION SH10DC40 40A, 100 Vdc Solid-State Relay 1.77 (45) max SH10DC40-16 40A, 60 Vdc Solid-State Relay SH20DC20-16 20A, 200 Vdc Solid-State Relay SH20DC40-16 40A, 200 Vdc Solid-State Relay SH75DC60-16 60A, 75 Vdc Solid-State Relay 4.7 Part Number Explanation 0.29 1.10 (28) M5 (30) max SH 10 DC 40 -16 2 3 Series Switch Type Option 1 Output Current Amps Line Voltage 2 1+ NOTES 1) Line Voltage (peak): 10 = 100 Vdc 4/A2 3/A1+ 2) Switch Type: DC = DC 3) Option: Internal Voltage Protection ELECTRICAL SPECIFICATIONS (+25C ambient temperature unless otherwise specifi ed) 1.00 (25.4) INPUT (CONTROL) SPECIFICATIONS M4 Min Max Units Dimensions in inches (mm) Weight: 2.82 oz. (80g) Control Range 3.5 32 Vdc Figure 1 Must Turn-Off Voltage 1 Vdc Reverse Voltage 32 Vdc CONTROL CHARACTERISTIC 50 35C 45 40 25C 35 BLOCK DIAGRAM 30 100C 25 1 + + 3 20 MOSFET Scst 15 10 Driver 5 PHV 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 2 4 Control Voltage (V) *Included with -16 option Figure 2 Figure 3 2010 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com SHDC Page 1 SHDC 012010 Q1 Control Current (mAdc) CONTROL 2.30 (58.5) max 0.28 (7) 1.70 (43.2) 0.12 (3) 0.64 (16.3) OUTPUT 1.87 (47.6) 0.20(5.2) NEW Series SHDC Output to 60A, 200 Vdc High Industrial Performance (HIPpak) DC Solid-State Relays ELECTRICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS (continued) (+25C ambient temperature unless otherwise specifi ed) (+25C ambient temperature unless otherwise specifi ed) OUTPUT (LOAD) SPECIFICATIONS OUTPUT (LOAD) SPECIFICATIONS Min Max Units Min Max Units Operating Range Output Capacitance (Typical) SH10DC40 5 100 Vdc SH10 0.7 nF SH10DC40-16 5 60 Vdc SH20DC20-16 0.6 nF SH20DC20-16 5 110 Vdc SH20DC40-16 1.1 nF SH20DC40-16 5 110 Vdc SH75DC60-16 1.5 nF SH75DC60-16 5 40 Vdc Junction-Case Thermal Resistance Peak Voltage SH10 0.9 C/W SH10DC40 100 Vdc SH20DC20-16 1.2 C/W SH10DC40-16 100 Vdc SH20DC40-16 0.7 C/W SH20DC20-16 200 Vdc SH75DC60-16 1.2 C/W SH20DC40-16 200 Vdc Built-In Heat Sink Thermal Resistance (Vertically Mounted) 10 C/W SH75DC60-16 75 Vdc Heat Sink Thermal Time Constant 10 min Overvoltage Protection (Built-In) 1 Control Inputs/Power Outputs SH10DC40-16 56V (TVS) 2 Insulation Voltage 2.5 kV SH20DCXX-16 75V (MOV Siz e 20) 1 SH75DC60-16 39V (TVS) Turn-On Time 20 s 1) Transient Voltage Supressor 2) Metal Oxide Varistor Turn-On Delay 20 s Reverse Voltage Drop Turn-Off Time 20 s SH10DC40-16 1.3 V Turn-Off Delay 20 s SH20DCXX-16 1.5 V On-Off Frequency 1000* Hz SH75DC60-16 0.92 V *For high frequency, take two times the load current to calculate the heat Nominal Current (Resistive) sink. SH10 40 A SH20DC20-16 20 A TIME DIAGRAMS SH20DC40-16 40 A SH75DC60-16 60 A TURN-ON Non-Repetitive Peak Overload Current Vc SH10 320 A (control) t SH20DC20-16 160 A Vt (switch) SH20DC40-16 380 A t SH75DC60-16 750 A tdon ton Leakage Current 3 mA On-State Resistance ( 25C) TURN-OFF 25 C 125 C Vc (control) SH10 15 30 m t Vt SH20DC20-16 45 90 m (switch) SH20DC40-16 23 46 m t SH75DC60-16 4.5 8.2 m tdoff toff Figure 4 SHDC Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2010 TELEDYNE RELAYS SHDC 012010 Q1