Passive Component LCR Meter Measures Inductance, Capacitance, and Resistance With secondary parameter Q (Quality), D (Dissipation), R (Resistance) Features: Simultaneous 20,000/10,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) or R (resistance) Set Hi/Lo limits using absolute values or percentage limits Parallel or Series equivalent circuit Max/Min/Avg Auto power off with disable Automatic blown fuse indication Built-in test fixture or use external test leads Open and Short Zero removes unwanted stray impedances from the measurement Relative mode, zero, or supplied reference Complete with test leads, 9V battery, software, cable, and protective holster Built-in RS-232 with Specifications Ranges Basic Accuracy Windows 95/98/NT/2000/XP Inductance 2000.0H, 20.000mH, 200.00mH, 2000.0mH (0.7%rdg + Lx/10000 + 5 digit) compatible software. 20.000H, 200.00H, 2000.0H, 10000H (DF<0.5) Capacitance 2000.0pF, 20.000nF, 200.00nF, 2000.0nF (0.7%rdg + 5 digit) 20.000F, 200.00F, 2000.0F, 10.000mF (DF<0.1) Resistance 20.000, 200.00, 2.0000k, 20.000k, (0.5%rdg + 8 digit) 200.00k, 2.0000M, 10.000M DF (with C) 0 to 0.9999 (0.7%rdg + 100/Cx + 5 digit) Q 0 to 9999 (1.2%rdg + 100/Lx + 5 digit) Test Frequency 120Hz and 1kHz Dimensions 7.56 x 3.58 x 2.1 (19.2 x 9.1 x 5.25cm) Weight 12.87oz (365g) Ordering Information: 380193 ........Passive Component LCR Meter 153117 ........117VAC adaptor 153220 ........230VAC adaptor Specifications subject to change without notice. 5/24/10 - R1 www.extech.com Copyright 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.