400A AC Clamp Meter + NCV Integrated Non-Contact Voltage Detector To quickly check for the presence of live wires before testing plus 40A and 400A current ranges Features: Built-in non-contact Voltage detector with LED alert 4000 count, backlit LCD display 1.2 (30mm) jaw size for conductors up to 350MCM Includes Multimeter functions AC/DC Voltage, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode, and Continuity Relative Mode for Capacitance Zero and Offset Adjustment Data Hold Auto Power Off Complete with test leads, general purpose Type K bead wire temperature probe, two AAA batteries, and carrying case Built-in non-contact Voltage detector with LED alert Specifications Range Max. Resolution Basic Accuracy (% readings+digits) Display counts 4000 AC Current 40.00A, 400.0A 0.01A (2.5% + 8d) AC Voltage 4.000V, 40.00V, 400.0V, 600V 0.001V (1.8% + 8d) DC Voltage 400.0mV, 4.000V, 40.00V, 400.0V, 600V 0.1mV (0.8% + 2d) Resistance 400.0 , 4.000k, 40.00k, 400.0k, 4.000M, 40.00M 0.1 (0.8% + 2d) Frequency 10Hz to 10kHz 0.01Hz (1.5% + 2d) Capacitance 40.00nF, 400.0nF, 40.00F, 100.0F 0.01nF (3.0% + 5d) Temperature -4 to 1400F (-20 to 760C) 0.1 (3% + 9F/5C) Duty Cycle 0.5 to 99.0% 0.1% (1.2% + 2d) Diode Yes Continuity Yes Compact size allows measurements in tight locations Dimensions 7.9x2.6x1.5 (200x66x37mm) Weight 7.2oz (205g) Ordering Information MA410 ........................400A AC Clamp Meter + NCV MA410-NIST................MA410 with Calibration Traceable to NIST Specifications subject to change without notice. 1/25/12 - R1 www.extech.com Copyright 2008-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.