Pinless Moisture Psychrometer + IR Thermometer Bluetooth Transmitter with MeterLink Wirelessly transmits moisture and humidity data to your FLIR high-definition infrared camera to incorporate meter readings with thermal images. Features: METERLiNK frees the Thermographer from the manual process of Quickly indicates the moisture content of multiple collecting field data wood types and other building materials with Pinless technology without damaging the surface Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length) Wireless communication with FLIR Thermal Imaging Cameras (b60, i60, B-Series, and T-Series) Manually store/recall up to 20 labeled readings Infrared cameras quickly locate moisture Easy to read, large dual display with automatic related problems backlight feature and Fast Analog Bargraph Simultaneously displays moisture value of wood or material being tested, Air Temperature, IR Temperature, or Humidity Pinless measurement depth to 0.75 (19mm) below the surface Collecting moisture readings on damaged Programmable high/low Moisture/Humidity alarms surfaces and associating them with regions on an infrared image can be a complicated Designed with an IR circuit to measure and cumbersome process non-contact surface temperature Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP)/(g/kg), Dew Point (DP), Vapor Pressure, and condensation point Automatic calculation of differential Temperature (IR - DP) to determine condensation point Manual data collection is time-consuming Min/Max, Data Hold, and Auto power off and prone to errors. METERLiNK eliminates this problem by allowing the thermographer Complete with pin moisture probe with cable, to quickly take moisture readings on a damaged surface and associate those 9V battery and pouch case readings with the corresponding targets stored in an infrared image Specifications Memory Manually Store/Recall 20 data readings Pinless Moisture (Non-Penetrating) 0 to 99.9 (Relative) Depth up tp 0.75 (19mm) Pin-type Moisture (probe included) 0 to 99.9% Max Resolution 0.1, 0.1F/C Humidity 0 to 100%RH Temperature (Air) -20 to 170F (-29 to 77C) Measure moisture of wall Pin Moisture Probe included Built-in IR thermometer design Temperature (IR) -4 to 392F (-20 to 200C) material with non-invasive for making contact moisture locates cold spots on walls, Vapor Pressure 0 to 20.0kPA Pinless technology measurements which identifies surfaces Dew Point -22 to 199F (-30 to 100C) subject to condensation (direct Mixing ratio 0 to 999GPP (0 to 160g/kg) differential display of IR - DP) Field of View 8:1 Distance to Target ratio Ordering Information: Emissivity 0.95 fixed Dimensions/Weight 6.5x2.8x1.5 (165x70x38)/7.4oz (210g) MO297................Pinless Moisture Psychrometer w/Memory + IR Thermometer MO290-P ............Replacement Pin Moisture Probe *NISTL is a Limited NIST: Product is certified to 33% & 75% Humidity and 77F &150F IR Temperature 12/19/11 - R1 Specifications subject to change without notice. www.extech.com Copyright 2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Environmental Test Equipment category: Click to view products by Extech manufacturer: Other Similar products are found below : CW40 F150C10E3DRT F150LTC20 F150CD10E2 F150L75 F150LRS S-11 FLUKE-LDG 382153 FM100 RH210 382253 MO290-P GEO-CABLE-REEL-50M T197914 RD300-L IR11BD IR11GM IR12GM IR21BD IR31CE IR32BC IR33BC MP7217TC NGM-1 SGX- 7NH3 UT381 F150-SLC50 AW-CO-1000 AW-NmHc-100 3.000.401 AX-7535 CS-9S6SS-A P 2800 A P 2801 P 2802 P 5039 P 5130 P 5055 P 5060 P 5065 P 5086 P 5090 P 5110 P 5115 P 5135 P 5140 P 5145 P 5150 P 5160