FLIR TA72/74 Universal Flex Current Probe Accessory The FLIR Universal Flex Current Probe accessories are designed to add capabilities, simplify challenges, and get the best readings with your existing meter. Made with a narrow flexible coil clamp, you can easily take measurements in tight or awkward spots a difficult task with a traditional hard jaw clamp meter. The connection is a standard banana plug and the output is a voltage signal, so its compatible with most DMMs and clamp meters, regardless of brand. TAKE ACCURATE MEASUREMENTS IN TIGHT OR AWKWARD SPOTS. Tricky conductors conquered Snake the coil around obstacles with ease even in deep, crowded cabinets Measure multiple conductors and targets with limited clearance Switchable AC current range 30A, 300A, 3000A EMPOWER YOUR METER. TA74 & TA72 Compatible with most DMMs and clamp meters, regardless of brand Adds 3000A AC current measurements to existing meters Standard banana plug connectors fit most meters AC voltage output for wide compatibility EASY INSPECTION AND NAVIGATION. Designed with your convenience in mind Bright, dual LED work lights provide built-in illumination for dark cabinets Rugged design drop-tested to 3 meters, portable and lightweight FLIR TA72 with work lights Limited lifetime warranty with registration CHOOSE FROM TWO FLEXIBLE COIL LENGTHS: TA72 - 10 (25.4cm) for easy maneuverability and compact convenience TA74 - 18 (45.72 cm) for larger and multiple conductor measurements, double-wrap requirements, and deeper access FLIR TA74 used in concert with the FLIR CM83 Clamp Meter www.flir.comSpecifications Flex Coil Universal Flex Current TA72 TA74 Probe Accessory Part number TA72 TA74 Measurement Maximum AC current 3000A AC 3000A AC AC current ranges 30.00A, 300.0A, 3000A 30.00A, 300.0A, 3000A and resolution Basic AC current accuracy 3.0% + 5 digits 3.0% + 5 digits (full scale) Dual White LEDs Measurement rate 1.5 samples per second, nominal 1.5 samples per second, nominal AC current bandwidth 45Hz 500Hz (sine wave) 45Hz 500Hz (sine wave) 1.4 (35mm) 1.0% 1.4 (35mm) 1.0% Positional error 2.0 (50mm) 1.5% 2.0 (50mm) 1.5% (distance from optimum) 2.4 (60mm) 2.0% 2.4 (60mm) 2.0% Meter Data Minimum requirements for AC voltage function 4000 AC voltage function 4000 Current Range meter compatibility with TA72 count display 1mV resolution count display 1mV resolution Indicator Light Max conductor 2.4 (6cm) 4.7 (12cm) diameter capacity Switchable AC Flex coil length 10 (25 cm) 18 (45 cm) Current Range Worklight and Flex coil diameter 0.3 (7.5mm) 0.3 (7.5mm) Power Button Flex coil tip diameter 0.5 (13mm) 0.5 (13mm) Probe length 73 (1.9m) 73 (1.9m) Work light Two white LEDs Two white LEDs Power supply (2) 1.5V AAA (2) 1.5V AAA Drop test 9.8 (3m) 9.8 (3m) Agency approvals CE, UL CE, UL Safety rating CAT IV 600V,CAT III 1000V CAT IV 600V,CAT III 1000V Standards EN610101, EN610102032 EN610101, EN610102032 Standard Banana Plug Connectors Warranty Limited lifetime with registration Limited lifetime with registration PORTLAND BOSTON Corporate Headquarters FLIR Systems, Inc. FLIR Systems, Inc. 27700 SW Parkway Ave. 25 Esquire Road Wilsonville, OR 97070 North Billerica, MA 01862 USA USA PH: +1 503.498.3547 PH: +1 978.901.8000 EUROPE SWEDEN FLIR Systems, Ltd. FLIR Systems, AB West Malling, Kent Tby, Sweden United Kingdom PH: +68.8.753.2500 PH: +44.1732.220011 www.flir.com NASDAQ: FLIR Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. 2015 FLIR Systems, Inc. All rights reserved. (Created 05/27/15) www.flir.com