WB200 Teledyne FLIR / Extech

WB200 Wet Bulb Hygro-Thermometer Datalogger Portable Hygro-Thermometer with Wet Bulb and Dew Point Temperature readings. This meter combines traditional dry/wet bulb operation with modern electronic circuitry to provide accurate readings and trouble-free operation especially in dusty environments. For hanging or bench-top use, the meter is ideal for greenhouses, paint booths, food processing, and other environmentally sensitive locations. Featur Featureses Display update rate: 120 seconds Audible and visual alarm alerts when temperature User programmable datalogging sampling rate and humidity level is higher or lower than the user from 15 to 60 minutes in 5 minute increments programmed High/Low set points Dual color LED indicator for datalogging (Green) LCD displays Wet Bulb, Dew Point, and Air and alarm (Red) modes Temperature readings (41F to 122F /5C to 50C) Water and Dust resistant construction and % Relative Humidity (0.0 to 99.9%RH) Maximum/Minimum function Resolution: 0.1F/C and 0.1%RH Low battery indicator Basic accuracy: 1F/0.6C 3%RH Dimensions: 2.8 x 3.1 x 7.0 (71 x 78 x 177mm) Two thermistors provide fast and accurate readings Weight: 8.0oz (250g) Built-in fan provides fast response time Complete with four AAA batteries and Datalogger stores100 records that can easily be 100-240V Universal AC adaptor Recalled on meter display Ordering WB200 .............. Wet Bulb Hygro-Thermometer Datalogger Speci cations subject to change without notice. Copyright 2012-2013 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form. www.extech.com Rev. 1/22/13 PRODUCT DA PRODUCT DA TTASHEETASHEET