TM Digital Storage Oscilloscope Features Dual analog channels width range 1mV/div ~ 20V/div 7 inches widescreen LCD display Special Print Screen Feature Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device USB drive system software upgrade Storage of waveforms setups and interfaces waveforms and setups reproduction Automatic measurement of 28 waveform parameters Unique waveform recording and replay function Multilingual menu displays Specifications Channels : 2 Bandwidth : 100MHz Sample Rate : 1GSPS Rise Time : 3.5ns Memory Depth : 25kpts Waveform Acquisition Rate : 2,000wfms/s Vertical Sensitivity : 1mV/div to 20V/div Timebase Range : 2ns/div to 50s/div Storage : Setup, Wave, Bitmap Trigger Modes : Edge, Pulse, Alternate Interface : USB OTG General Characteristic Power : 100 - 240V AC, 45 - 440Hz Display : 7 Inches 64K Colour TFT LCD, 400 240 Product Colour : White and Grey Product Net Weight : 2.2 kg Product Size : 306mm 147mm 122mm Standard Accessories : Probe2 (1,10 switchable),Power Cord, USB Cable, PC Software CD Safety Rating : CAT II 300V Part Number Table Description Part Number Oscilloscope, 2CH, 50MHz, 1GSPS 72-8710 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. Premier Farnell plc 2012. TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <1> 10/07/15 V1.0TM Single Bench DC Power Supply Features: Complete digital control 10mV / 1mA resolution Low noise and ripple CV / CC constant voltage and constant current mode OCP and OVP settings, constant protection mode 5 sets of parameters can be stored and recalled Output switch control Power-off memory function Keyboard lock function Specifications: Voltage Range / Current Range 0 - 30V / 0 - 3A Load Regulation Voltage : 0.01% +2mV / Current : 0.1% +5mA Line Regulation Voltage : 0.01% +3mV / Current : 0.1% +3mA Setup Resolution Voltage : 10mV / Current : 1mA Setup Accuracy (25C 5C) Voltage : 0.5% +20mV / Current : 0.5% +5mA Ripple (20Hz - 20MHz) Voltage : 1mVrms / Current : 3mArms Temp. Coefficient Voltage : 100ppm +10mV / Current : 100ppm +5mA Read Back Accuracy Voltage : 10mV / Current : 1mA Read Back Temp. Coefficient Voltage : 100ppm +10mV / Current : 100ppm +5mA Reaction Time (10% Rated load) Voltage : 100mS / Current : 100mS Indoor use Altitude : 2,000m Operation Environment Ambient temperature : 0 C ~ 40C Relative humidity : 80% Weight and Dimension 3.5kg / 110mm(W) 156mm(H) 260mm(D) Ambient temperature : -10 C to +70 C Storage Environment Relative humidity : 70% Accessories User manual, UK Power cord (1.2m), Euro Power cord (1.2m) Note: Input Voltage : 230V 10% Part Number Table Description Part Number DC Power Supply, Bench, Single, 3A, 30V 72-10480 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. Premier Farnell plc 2012. TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <1> 15/06/15 V1.0