We measure it. Temperature measuring instrument (1-channel) testo 110 Universally applicable Wireless measurement with radio probes possible C TopSafe, the indestructible protective case, protects from dirt and impact (with TopSafe and probe attached) Automatic final value recognition (Auto-hold) Audible alarm (settable limit values) Min./max. value store Large illuminated display Certified according to EN 13485 The testo 110 is a highly accurate, universally applicable The monitoring measuring instrument is especially designed temperature measuring instrument. The optional protective for measurements in refrigerated rooms and buildings, and cover (TopSafe) protects it reliably from dirt, water and in outdoor areas. In addition to the wide selection of impact this makes it ideal for use in tough surroundings. classical probes, a wireless radio probe can simultaneously With the TopSafe, the testo 110 conforms to HACCP as well be used (when the wireless module in used in the as EN 13485. instrument). As the user, you can set your own upper and lower limit values in the instrument as soon as these values are violated, an audible alarm sounds. In addition to this, the minimum and maximum values are clearly shown in the 2-line backlit display. www.testo.co.uktesto 110 We measure it. Temperature measuring instrument (1-channel) NTC Sensor type Meas. range -50 to +150 C testo 110 Accuracy 0.2 C (-20 to +80 C) 1 digit 0.3 C (remaining range) testo 110, 1 channel temperature measuring instrument NTC, audible alarm, connection to an Resolution 0.1 C optional radio probe, with battery and calibration protocol General technical data Storage temp. -40 to +70 C Part no. 0560 1108 Oper. temp. -20 to +50 C Battery type 9V block battery, 6F22 Battery life 200 h (connected probe, backlight o) 45 h (radio mode, backlight o) 68 h (connected probe, backlight always on) 33 h (radio mode, backlight always on) Weight 171 g Dimensions 182 x 64 x 40 mm Material/Housing ABS Warranty 2 years Optional protective case TopSafe Probe connection Part no. Accessories Accessories for measuring instrument 9V rech. battery for instrument instead of battery 0515 0025 Recharger for 9V rechargeable battery for external recharging of 0515 0025 battery 0554 0025 Lithium battery button cell , CR2032 AA batteries for radio handle 0515 0028 Radio module for upgrading measuring instrument with radio option Radio module for measuring instrument, 869.85 MHz, approval for the countries: DE, FR, UK, BE, NL, ES, IT, SE, AT, 0554 0188 DK, FI, HU, CZ, PL, GR, CH, PT, SI, MT, CY, SK, LU, EE, LT, IE, LV, NO Radio module for measuring instrument, 915.00 MHz FSK, approval for USA, CA, CL 0554 0190 Printer and Accessories Testo fast printer IRDA with wireless infrared interface 1 roll thermal paper 4 AA batteries for printing out measurements on site 0554 0549 Spare thermal paper for printer (6 rolls), permanent ink measurement data documentation legible for up to 10 years 0554 0568 Spare thermal paper for printer (6 rolls) 0554 0569 External fast charger for 1-4 AA rech. batteries, incl. 4 Ni-MH rech. batteries with individual cell charging and charge 0554 0610 control display, incl. impulse trickle charging, integrated discharge function, with built-in international mains plug, 100- 240 V, 300 mA, 50/60 Hz Transport and Protection TopSafe, protects from impact and dirt (incl. 2 attachment magnets) 0516 0221 Case for measuring instrument and probes 0516 0210 Transport case for meas. instr. and probes (405 x 170 x 85 mm) 0516 0201 Transport case for measuring instrument, 3 probes and accessories (430 x 310 x 85 mm) 0516 0200 Calibration certificates ISO calibration certificate/temperature, for air/immersion probes, calibration points -18C 0C +60C 0520 0001 ISO calibration certificate/temperature, single point calibration for surface thermometer calibration point +60C 0520 0072 ISO calibration certificate/temperature, single point calibration for surface thermometer calibration point +120C 0520 0073 DAkkS calibration certificate/temperature, meas. instr. with air/immersion probe calibration points -20 C 0 C +60 C 0520 0211