SFP+ Electrical Loopbacks (EL-11-07001) Applications Premium Solutions SFP+ Electrical Loopbacks Board and System Level Testing for Testing and Measurement Test and Measurement Switch and Router Chamber Testing The Timbercon EL-11-07001 SFP+ electrical 100Mb/s to 10.7Gbps loopback is used for testing SFP+ transceiver ports in host/system boards. By substituting a full-featured SFP+ transceiver, the electrical Features loopback provides a cost effective method for SFP+ MSA Compliant SFP+ port testing. Hot-Pluggable MSA Footprint Dual LED Indicator to Display Module Status The EL-11-07001 is packaged in an MSA No Reference Clock Required compliant housing offering excellent heat Compliant With SONET, SDH, GBE, FC dissipation, compatible with all SFP+ ports. One(1) Watt Power Consumption Transmit data from the host is electrically Case Temperature Range from -40 C routed, (in R&D validation, production testing to +85 C and eld analysis. Automatic Shut Down & Self-Protection Custom Memory Map Capability About Founded in 1997, Timbercon, Inc. is a ber optic Bene ts product and solution manufacturing company providing a vast array of connectivity solutions Economical SFP+ Port Testing to the data storage, telecommunications, military, Power on Validation industrial, harsh environment, medical, broadcast Temperature Sensing and networking industries. In addition to standard ber optic patch cords and attenuated test cables, Timbercon has pioneered proprietary products, many of which are now considered to be an industry benchmark.SFP+ Electrical Loopbacks (EL-11-07001) Memory Map Memory Location Descriptions In addition to the electrical loopback function, the EL-11-07001 provides a MSA standard 2-wire serial 2 Wire address 2 Wire address 1010000X (A0h) 101000X (A2h) communication interface to digital diagnostics. This 0 0 provides information about the present operating Alarm and Warning conditions, as well as the pre-loaded EEPROM Serial ID De ned by Thresholds (56 bytes) SFP MSA (96 bytes) memory map. Both standard and custom memory 55 Cal Constants maps are available. (40 bytes) 95 95 Real Time Diagnostic Vendor Speci c Interface(24 bytes) (32 bytes) LED Indicators 119 Vendor Speci c (8 bytes) 127 The Timbercon EL-11-07001 contains two LED indi- 127 cators to display the operating status of the device. User Writable Reserved EEPROM (120 bytes) (128 bytes) The green LED illuminates when the loopback is 247 fully plugged in and blinks when the temperature is Vendor Speci c (8 bytes) 255 beyond the allowable range. The red LED illumi- 255 nates for a power down status and blinks when the Loopback shuts down due to extreme temperature, Recommended Operating Conditions Parameter Symbol Notes Min Max Unit Maximum Supply Voltage Vcc -0.5 4.0 V Storage Temperature Ts -40 85 C Case Operating Temperature Top -40 85 C Supply Voltage Vcc 3.15 3.45 V Supply Current Icc 1 300 mA Supply Current Power-Down Iccd 1 200 mA Module Total Power-Down P 1 1 W Bit Rate BR 100M 10.7G Bps Bit Error Ratio BER 2 1.00E-12 17387 SW 63rd Avenue Lake Oswego, OR 97035 USA 503.827.8141 800.221.6992 503.228.6747 fax www.timbercon.com info timbercon.com