TA58L05, 06, 08, 09, 10, 12, 15F TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA58L05F, TA58L06F, TA58L08F, TA58L09F TA58L10F, TA58L12F, TA58L15F 250 mA Low Dropout Voltage Regulator The TA58L**F Series consists of fixed-positive-output, low-dropout regulators with an output current of 250 mA (max) that utilize PNP transistors for the output stage. Low dropout voltage and standby current make the TA58L**F Series suitable for applications requiring low power consumption. Features HSOP3-P-2.30D Maximum output current : 250 mA Weight : 0.36 g (typ.) Output voltage : 5/ 6/ 8/ 9/ 10/ 12/ 15 V Output voltage accuracy : V 3% ( T = 25C) OUT j Low-dropout voltage : 0.4 V (max) ( I = 200 mA) OUT Protection function : Overcurrent protection / overheating protection / Reverse connection of power supply / 60 V load dump Package type : Surface-mount New PW-Mold Pin Assignment Mark 1 3 2 IN GND OUT 1 2009-09-30 TA58L05, 06, 08, 09, 10, 12, 15F Marking 3 Part No. (or abbreviation code) 58L**F Lot No. Note 1 1 2 Note 1: A line under a Lot No. identifies the indication of product Labels. Not underlined: Pb /INCLUDES > MCV Underlined: G /RoHS COMPATIBLE or G /RoHS Pb Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Note 2: The ** in each product name is replaced with the output voltage of each product. The product(s) in this document (Product) contain functions intended to protect the Product from temporary small overloads such as minor short-term overcurrent, overvoltage, or overheating. The protective functions do not necessarily protect Product under all circumstances. When incorporating Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve the Product of such overload conditions immediately upon occurrence. For details, please refer to the notes appearing below in this document and other documents referenced in this document. Pin Description Pin No. Symbol Description 1 IN Input terminal. Connected by capacitor (C ) to GND. IN 3 GND Ground terminal 2 OUT Output terminal. Connected by capacitor (C ) to GND. OUT How to Order Product No. Package Package Type and Capacity TA58L**F(TE16L1,NQ (Note3) New PW-Mold: Surface-mount Tape (2000 pcs/reel) Note 3: The ** in each product number is replaced with the output voltage of each product. Block Diagram 1 IN Over current protection OUT 2 Over voltage/ thermal shutdown + GND 3 2 2009-09-30