TC74AC14FTEL Toshiba

TC74AC14P/F/FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74AC14P, TC74AC14F, TC74AC14FT Hex Schmitt Inverter The TC74AC14 is an advanced high speed CMOS SCHMITT TC74AC14P INVERTER fabricated with silicon gate and double-layer metal 2 wiring C MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low pwer dissipation. Pin configuration and function are the same as the TC74AC04 but the inputs have hysteresis and with its schmitt trigger function, the TC74AC14 can be used as a line receivers which will receive slow input signals. All inputs are equipped with protection circuits against static TC74AC14F discharge or transient excess voltage. Features High speed: t = 5.3 ns (typ.) at V = 5 V pd CC Low power dissipation: I = 4 A (max) at Ta = 25C CC Symmetrical output impedance: I = I = 24 mA (min) OH OL Capability of driving 50 transmission lines. TC74AC14FT Balanced propagation delays: t t pLH pHL Wide operating voltage range: V = 2 to 5.5 V CC (opr) Pin and function compatible with 74F14 Weight DIP14-P-300-2.54 : 0.96 g (typ.) SOP14-P-300-1.27A : 0.18 g (typ.) TSSOP14-P-0044-0.65A : 0.06 g (typ.) Start of commercial production 1988-10 1 2014-03-01 TC74AC14P/F/FT Pin Assignment IEC Logic Symbol (1) (2) 1A 1Y 1A 1 14 V CC (3) (4) 2A 2Y (5) (6) 3A 3Y 1Y 2 13 6A (9) (8) 4A 4Y (11) (10) 2A 12 6Y 3 5A 5Y (13) (12) 6A 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y (top view) Truth Table A Y L H H L System Diagram, Waveform A Y V H V P V (A) IN V N V (Y) OUT Absolute Maximum Ratings (Note 1) Characteristics Symbol Rating Unit Supply voltage range V 0.5 to 7.0 V CC DC input voltage V 0.5 to V + 0.5 V IN CC DC output voltage V 0.5 to V + 0.5 V OUT CC Input diode current I 20 mA IK Output diode current I 50 mA OK DC output current I 50 mA OUT DC V /ground current I 150 mA CC CC Power dissipation P 500 (DIP) (Note 2)/180 (SOP/TSSOP) mW D Storage temperature T 65 to 150 C stg Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: 500 mW in the range of Ta = 40 to 65C. From Ta = 65 to 85C a derating factor of 10 mW/C should be applied up to 300 mW. 2 2014-03-01